About Course
Mechanical engineering is an engineering discipline that combines engineering physics and mathematics principles with materials science to design, analyse, manufacture, and maintain mechanical systems. It is one of the oldest and broadest of the engineering disciplines.
What I will learn?
- 400+ Hrs Live Recorded Lectures
- Course includes – Recorded Lecture Videos , E-book , Practice Set with PYQ , Chapter wise Mock Test and Full Length Mock Test
- Recorded by Best Mentors across the country from IIT/IISc
Course Curriculum
Module – Quantative Aptitude
Chapter 1 – Number
-
53:51
-
21:33
-
16:15
-
22:36
-
12:51
-
22:33
-
23:54
-
25:31
-
42:53
-
36:42
-
01:10:10
-
35:05
-
15:24
Chapter 2 – Percentages and Application
Chapter 3 – Ratio, Proportion and Mixtures
-
17:53
-
08:36
-
23:10
-
13:12
-
13:12
Chapter 4 – Time-Speed-Distance
-
07:41
-
10:54
-
21:48
-
10:43
-
11:02
-
31:07
Chapter 5 – Time And Work
Chapter 6 – Geometry
-
16:53
-
19:00
-
05:15
-
11:29
-
07:18
-
17:46
-
52:04
-
37:10
-
01:01:36
Chapter 7 – Permutation And Combination
-
12:02
-
11:58
-
06:44
-
11:57
-
32:39
-
08:24
-
25:59
Chapter- 8 Probability
Chapter- 9 Algebra
-
17:57
-
19:03
-
37:51
-
46:35
-
49:03
-
54:15
-
23:39
-
28:53
Chapter – 10 Set Theory
-
11:28
Chapter – 11 Spatial Aptitude
-
56:41
Chapter – 12 Previous Year Aptitude GATE Questions
-
12:37
-
20:05
-
15:10
-
12:06
-
12:32
-
09:12
-
12:15
-
10:52
-
08:52
-
11:14
-
07:30
-
16:15
-
10:32
-
15:36
-
10:37
-
08:11
-
15:10
E-Book – Quantitative Aptitude
-
E-Book
Practice Set – Quantative Aptitude
-
Practice Set 1
-
Practice Set 2
Mock Test – Quantative Aptitude
-
Mock Test 1
-
Mock Test 2
Module – Engineering Mathematics
Chapter 1: Limit
-
1.1 Introduction to Limit
21:39 -
1.2 Indeterminate forms
01:09:01 -
1.3 LImit Chapter GATE Questions
26:48 -
1.9 Approximation Method
31:11 -
1.10 Limit involving modulus function
27:24 -
1.11 Limit involving Riemann integration
34:32 -
1.12 Limit involving greatest integer function
21:19 -
1.13 Various exam questions and practice questions
22:46
Chapter 2: Continuity
-
2.1 Introduction to Continuity
01:11:59 -
2.2 Introduction to Continuity – GATE Questions
16:40 -
2.3 Types of Discontinuity
36:59
Chapter 3: Differentiability
-
3.1 Introduction to Differentiability Part – I
35:43 -
3.2 Differentiability of modulus function Part – II
34:47 -
3.3Introduction to Differentiability GATE Questions
28:24
Chapter 4: Properties of Functions
-
4.1 Properties of Functions
30:27
Chapter 5: Maxima & Minima
-
5.1 Introduction to Maxima & Minima
23:52 -
5.2 Maxima and Minima GATE Questions
12:58 -
5.3 Maxima & Minima (Two Variable)
29:47 -
5.4 Maxima And Minima Gate Questions – Math – Part-I
27:29 -
5.5 Maxima And Minima Gate Questions – Math – Part-II
45:11 -
5.6 Maxima And Minima Gate Questions – Math – Part-III
31:50
Chapter 6: Mean Value Theorem
-
6.1 Introduction to Mean-Value Theorem
28:00 -
6.2 Mean-Value Theorem GATE Questions
17:26
Chapter 7: Integration
-
7.1 Integration
57:39 -
7.2 Integration – Arc, Area , Length and Volume
01:19:26
Chapter 8: Linear Algebra
-
8.1 Linear Transformation
01:52:51 -
8.2 Introduction to matrices
58:27 -
8.3 Rank & Nullity
24:32 -
8.4 System of linear equations
01:12:43 -
8.5 Eigenvalues & Eigenvectors
41:57 -
8.6 Number of linearly independent Eigenvectors
01:16:46 -
8.7 Diagonalization of matrix
48:21 -
8.8 Some important properties of special matrices
42:25
Chapter 9: Probability Distribution
-
9.1 Probability Distribution
01:58:46 -
9.2 Poisson’s Distribution
01:04:32
Chapter 10: Statistics
-
10.1 Statistics
02:26:57 -
10.2 Statistics Gate Questions (MATHs)
05:46
Chapter 11: Differential Equation
-
11.1 Differential Equation Part – I
33:40 -
11.2 Differential Equation Part – II
01:01:04 -
11.3 Differential Equations – GATE Questions
17:02 -
11.4 Partial Differential Equations
01:13:03 -
11.15 Differential Equations GATE Questions
47:36
Chapter 12: Numerical Methods
-
12.1 Numerical Integration
01:47:40 -
12.2 Numerical Differentiation
01:11:01 -
12.3 Roots of Equations
02:15:45
Chapter 13: Complex Analysis
-
13.1 Complex Analysis PART – I
01:11:27 -
13.2 Complex Analysis PART – II
01:20:05 -
13.3 Complex Analysis PART – III
53:37 -
13.4 Complex Analysis – GATE Questions
01:13:24 -
13.5 Complex Differentiation
30:09 -
13.6 Zeros & Singularity: Poles, Essential Singularity, Harmonic Singularity
22:07
Chapter 14: Vector Analysis
-
14.1 Basics of Vector
01:06:58 -
14.2 Vector Differentiation – Gradient, Directional Derivative, Normal, Divergence, Curl
54:12 -
14.3 Vector Integration – Open path line integration, Closed path line integration, Surface integration, Stokes Theorem, Green’s Theorem, Gauss’s Divergence Theorem
42:36 -
14.4 Vector Analysis – PART -4
02:10:21 -
14.5 GATE questions
27:15 -
14.6 GATE questions 2
25:00
Chapter 15: Laplace Transform
-
15.1 Laplace Transform
02:23:11 -
Laplace Transform – GATE Questions
06:52
E-Book – Engineering Mathematics
-
E-Book
Practice Set – Engineering Mathematics
-
Practice Set 1
-
Practice Set 2
Mock Test – Engineering Mathematics
-
Mock Test 1
-
Mock Test 2
ThermoDyanamics
Chapter 1: Basics of Thermodynamics
-
1.1 Introduction(Evolution) of Thermodynamics (THERMO)
29:04 -
1.2 Thermodynamic System And Processes (THERMO)
59:27 -
1.3 Zeroth Law Of Thermodynamics & Thermometric Principle (THERMO)
47:54 -
1.4.(a) Thermodynamic Work Transfer (THERMO)
01:40:45 -
1.4.(b) Thermodynamic Work Transfer Question (THERMO)
22:00 -
1.5 Heat & First law of Thermodynamics (THERMO)
50:33 -
1.6 Heat Transfer for Various Processes (THERMO)
56:49 -
1.7 Steady Flow Energy And Work Flow (THERMO)
01:41:13 -
1.8 GATE Questions (THERMO)
20:51
Chapter 2: Second law of Thermodynamics
-
2.1 Second Law Of Thermodynamics (THERMO)
01:09:43 -
2.2 Thermodynamic Temperature Scale (THERMO)
47:42 -
2.3 Entropy & Clausius Inequality (THERMO)
45:41 -
2.4 Physical Meaning Of Entropy (THERMO)
01:24:12 -
2.5 Gate Questions (THERMO)
33:44
Chapter 3: Available Energy/Exergy/Availability
-
3.1 31-concept-of-available-energy-exergy-change-in-exergy-due-to-finite-temperature-difference-thermo
46:46 -
3.2 32-exergy-associated-with-ke-pe-exergy-change-of-a-system-closed-open-and-concept-of-irreversibility-thermo
35:16 -
3.3 33-second-law-efficiency-solved-examples-on-exergy-thermo
50:55 -
3.4 34-gate-questions-thermo
41:29 -
3.5 35-heat-transfer-through-rod-connected-two-heat-source-at-different-temperature-ht
12:53 -
3.6 36-infinite-long-fin-approximation-ht
35:28 -
3.7 37-fins-efficiency-and-effectiveness-ht
32:40 -
3.8 38-unsteady-state-transient-heat-conduction-ht
56:31 -
3.9 39-examples-based-on-unsteady-state-heat-conduction-ht
23:15 -
3.10 310-fins-and-unsteady-gate-questions-ht
16:13
Chapter 4: Thermodynamic Relation
-
4.1 Thermodynamic Relation
01:14:06 -
4.2 Joule-Thompson Coefficient , Clapeyron and Clausius-clapeyron equation
46:39 -
4.3 Solved Examples on Thermodynamic Relation
14:08 -
4.4 Gate Questions on Thermodynamic Relation
16:09 -
4.5 Thermodynamic Properties Of Fluid I
41:14 -
4.6 Thermodynamic Properties Of Fluid II
41:14
Chapter 5: Pure Substances
-
5.1 Concept of Pure substance & Table and Charts like P-V , T-S & P-T Plot
01:17:12 -
5.2 Properties of Pure Substance and its Calculation , H-S Plot
35:55 -
5.3 Behavior of Ideal & Real gases and Reduced temperature & Pressure Concept.
41:37 -
5.4 Examples on Properties of Pure Substance
23:09 -
5.5 Gate Question on Properties of Pure Substance.
22:47
Chapter 6: Steam Turbine
-
Steam Turbine
35:11
Chapter 7: Gate Questions (Thermodynamics)
-
Gate questions -1
31:56 -
Gate questions -2
35:31 -
Gate questions -3
31:36 -
Gate questions -4
32:31 -
Gate questions -5
20:51
E-Book – Thermodynamics
-
E-Book
Practice Set – Thermodynamics
-
Practice Set 1
-
Practice Set 2
Mock Test – Thermodynamics
-
Mock Test 1
-
Mock Test 2
Module – Application of Thermodynamics
Chapter 1: Properties of Pure Substance
-
1.1 Pure substance (THERMO)
01:17:12 -
1.2 Properties of Pure Substance (THERMO)
35:55 -
1.3 Pure Substance (Example THERMO)
23:09
Chapter 2: Gas power Cycles (Brayton Cycle )
-
2.1 Basics of Power Cycle & Gas Turbine
35:56 -
2.2 Effect of various Parameters on Gas Turbine
40:45 -
2.3 Isentropic Efficiency & Regeneration
45:12 -
2.4_Gate Questions_On_Brayton_Cycle
28:50 -
2.5_Gas Turbine_Intercoding
30:40 -
2.6_Gas Turbine_Reheating
33:02 -
2.7_Gate Questions_On_Brayton_Cycle
17:31
Chapter 3: Vapour power cycles
-
3.1 Basics of Vapour Power Cycle (Steam Turbine)
35:03 -
3.2 Ways to Improve The Efficiency of Vapour Power Cycle
24:49 -
3.3 Ideal Reheat Cycle
15:42 -
3.4 Ideal Regenerative Rankine Cycle
39:39 -
3.5 Combined Cycle(Binary Cycle)
11:50 -
3.6 Gate Questions on Rankine Cycle
26:26
Chapter 4: Air and Gas Compressor
-
4.1 Air and Gas Compressor
34:32
Chapter 5: IC Engines: Air-standard Otto, Diesel, and dual cycle
-
5.1 I C Engine : Otto Cycle
01:12:02 -
5.2 I C Engine : Exapmle Based on Otto Cycle
20:35 -
5.3 I C Engine : Diesel Cycle
45:37 -
5.4 I C Engine : Dual Cycle
17:24 -
5.5 I C Engine : Comparison of Efficiency of Different Cycle
23:38
Chapter 6: Gate Questions (Application of Thermodynamics)
-
6.1 Gate Questions (Application of Thermodynamics)
35:15 -
6.2 Gate Questions (Application of Thermodynamics)
37:14 -
6.3 Gate Questions (Application of Thermodynamics)
31:19 -
6.4 Gate Questions (Application of Thermodynamics)
29:51
E-Book – Application of Thermodynamics
-
E-Book
Practice Set – Application of Thermodynamics
-
Practice Set 1
-
Practice Set 2
Mock Test – Application of Thermodynamics
-
Mock Test 1
-
Mock Test 2
Engg. Mechanics
Chapter 1: Force Systems
-
1.1. Force and its classification
39:33 -
1.2. Principle of Transmissibility – Force as a sliding vector
17:20 -
1.3. Concurrent Force System
01:03:23 -
1.4. Force And Couple System
01:19:06 -
1.5. Tips to Draw Free Body Diagram
47:16 -
1.6. Standard Problems Force And Couple System
37:46
Chapter 2: Structure Analysis
-
2.1. Structure analysis
31:30 -
2.2. Analysis of Plane Trusses
01:04:26 -
2.3. Standard Problems of Plane Trusses
27:10 -
2.4. Chapter-1 and 2 GATE Questions
50:51
Chapter 3: Distributed forces
-
3.1. Distributed forces-I
34:39 -
3.2. Distributed forces-II
19:07
Chapter 4: Dynamics of Particles
-
4.1. Newton law of motion –II
55:39 -
4.2. Friction
01:10:35 -
4.3. Standard Problems on Friction
43:04 -
4.4. Chapter-4 GATE Questions on Friction
36:19 -
4.5. Kinematics of particles
01:06:50 -
4.6. Chapter-4 Gate Questions On Kinematics Of Particle
19:55 -
4.7. Circular Motion And Projectile Motion
01:00:36 -
4.8. Centre Of Mass
47:21 -
4.9. Linear Momentum of a Particle & System of Particles
31:22 -
4.10. Work And Energy
52:26 -
4.11. Collision Theory
27:07 -
4.12. Standard Problems Based On Momentum And Energy Conservation
38:04 -
4.13. GATE Questions on Momentum Conservation, Collision and Energy
01:01:42
Chapter 5: Dynamics of Rigid Bodies
-
5.1. Dynamics of Rigid Bodies – I
01:17:35 -
5.2. Dynamics of Rigid Bodies – II
01:14:15 -
5.3. Dynamics of Rigid Bodies – III
01:12:22 -
5.4. Dynamics of Rigid Bodies – IV
28:01 -
5.5 GATE Questions on kinematics and Dynamics of Rigid Bodies
58:35
Chapter 6: Belt Pulley& Wedges
-
6.1 Belt Pulley& Wedges
01:33:01 -
6.2 Belt Pulley& Wedges
01:02:58
Chapter 7: Application of Wedges-Power Screw & Rolling Fiction
-
7.1 Application of Wedges-Power Screw & Rolling Fiction
01:28:17 -
7.2 Application of Wedges-Power Screw & Rolling Fiction
01:00:17
Chapter 8: Langrange’s Equation
-
8.1 Langrange’s Equation
02:34:39 -
8.2 Language’s Equation 2
47:30
Chapter 9: GATE QUESTIONS
-
9.1 Gate questions -1
35:25 -
9.2 Gate questions -2
27:24 -
9.3 Gate questions -3
35:47 -
9.4 Gate questions -4
30:08
E-Book – Engineering Mechanics
-
E-Book
Practice Set – Engineering Mechanics
-
Practice Set 1
-
Practice Set 2
Mock Test – Engineering Mechanics
-
Mock Test 1
-
Mock Test 2
Module – Fluid Mechanics
Chapter 1: Preview of Fluid Mechanics
-
1.1 Preview of Fluid Mechanics
34:10
Chapter 2: Review of Mechanics
-
2.1 Review of Mechanics -I
39:33 -
2.2 Review of Mechanics -II
31:18 -
2.3 Review of Mechanics -III
53:30 -
2.4 Review of Mechanics -IV
55:39
Chapter 3: Introduction & Fluid Properties
-
3.1 States of Matter / Distinction between Solid & Fluid
34:10 -
3.12 Standard Problems
20:19 -
Fluid Properties 1
43:57 -
Fluid properties 2
41:35 -
Fluid Properties 3
01:12:59 -
Fluid Properties 4
01:03:16
Chapter 4: Fluid Statics
-
4.1 FUNDAMENTAL EQUATION OF FLUID STATICS
50:37 -
4.2 PRESSURE & ITS MEASUREMENT
38:30 -
4.3 SOME STANDARD PROBLEMS ON MANOMETERS
39:43 -
4.4 FORCES ON SUBMERGED BODIES – I
41:44 -
4.5 FORCES ON SUBMERGED BODIES – II
01:00:42 -
4.6 BUOYANCY
01:08:08 -
4.7 STABILITY OF UNCONSTRAINED BODIES IN FLUID
45:47 -
4.8 FLUID UNDER RIGID BODY MOTION / RELATIVE EQUILIBRIUM
01:06:46 -
4.9 GATE Problems I
20:40 -
4.10 GATE Problems II
27:27 -
4.11 GATE Problems III
18:11 -
4.12 GATE Problems IV
36:43 -
4.13 GATE Problems V
32:19
Chapter 5: Fluid Kinematics
-
5.1 fundamentals-fm
01:41:40 -
5.2 fluid-translation-rotation-deformation-i-fm
01:02:08 -
5.3 fluid-translation-rotation-and-deformation-ii-fm
01:19:55 -
5.4 stream-function-velocity-potential-fm
01:06:13 -
5.5 some-standard-problems-of-fluid-kinematics-fm
49:31 -
5.6 gate-problems-1-to-7-fm
21:21 -
5.7 gate-problems-8-to-11-fm
18:07 -
5.8 gate-problems-12-to-19-fm
37:32
Chapter 6: Integral form of Conservation Equations
-
6.1 Need for Reynolds Transport Theorem (RTT)
28:38 -
6.2 Intensive and Extensive Properties
43:15 -
6.3 Understanding Discharge and Mass Flow Rate
51:02 -
6.4 Integral Form of Continuity Equation
50:15
Chapter 7: Dynamics of Inviscid Flows – Fundamentals & Application
-
7.1 Fundamental Equation of Motion for Inviscid Flow in Cartesian Coordinates
40:28 -
7.2 Pressure Differential between Two Points in an Inviscid Flow Field
40:22 -
7.3 Derivation of Bernoulli’s Equation and Its Assumption
01:20:34 -
7.4 Physics Behind Bernoulli’s Equation
37:31 -
7.5 Hydraulic Siphon
21:41 -
7.6 Flow Measurement – Venturimeter
29:05 -
7.7 Orifice Meter
20:50 -
7.8 Concept of Static, Stagnation, and Dynamic Pressure
20:50 -
7.10 Vortex Flows
21:41
Chapter 8: Dynamics of Viscous Incompressible Flow
-
8.1 Introduction to Navier-Stokes Equation
01:41:53 -
8.2 Plane Poiseuille Flow
36:26 -
8.3 Couette Flow
01:29:29 -
8.4 Hagen Poiseuille Flow
01:06:15 -
8.11 Flow Through Branched Pipes
01:06:15 -
8.12 GATE Problems
35:23
Chapter 9: Boundary Layer Theory
-
9.1 BOUNDARY LAYER THEORY – I
01:12:17 -
9.2 BOUNDARY LAYER THEORY – II
01:12:30 -
9.3 BOUNDARY LAYER THEORY – III
01:20:36 -
9.4 Problems of BOUNDARY LAYER THEORY
36:29 -
9.5 GATE Questions BOUNDARY LAYER THEORY
07:51
Chapter 10: Principle of Similarity and Dimensional Analysis
-
10.1 DIMENSIONAL ANALYSIS & PRINCIPLE OF SIMILARITIES – I
49:23 -
10.2DIMENSIONAL ANALYSIS & PRINCIPLE OF SIMILARITIES – II
01:00:09 -
10.3 GATE Questions DIMENSIONAL ANALYSIS & PRINCIPLE OF SIMILARITIES
15:15
Chapter 11: Turbulent Flow
-
11.1 Turbulent Flow Introduction
01:05:26
Chapter 12: Fluid Machines
-
12.1 Reynolds Transport Theorem Applied to Law of Conservation of Angular Momentum
30:17 -
12.2 Lawn Sprinkler
01:17:31 -
12.3 Introduction and Classification of Fluid Machines
01:08:25 -
12.4 Different Components of Velocity
37:04 -
12.5 Fundamental Equation of Energy Transfer in Rotodynamic Machines
47:14 -
12.6 Velocity Diagrams
01:02:43 -
12.7 Different Components of Energy Transfer
36:26 -
12.26 GATE PROBLEMS
53:52 -
Fluid Machines i
01:20:17 -
Fluid Machines ii
01:17:31 -
Fluid Machines iii
01:08:25 -
Fluid Machines iv
01:29:27 -
Fluid Machines v
47:14 -
Fluid Machines vi
01:02:43
Chapter 13: Basics of Compressible
-
13.1 Basics of Compressible
01:08:12 -
13.2 Basics of Compressible
01:45:20
E-Book – Fluid Mechanics
-
E-Book
Practice Set – Fluid Mechanics
-
Practice Set 1
-
Practice Set 2
Mock Test – Fluid Mechanics
-
Mock Test 1
-
Mock Test 2
Module – Heat Transfer
Chapter-1 Introduction of Heat Transfer
-
1.1 Introduction of Heat Transfer (Difference between heat transfer & thermodynamics, Modes of Heat Transfer and Variation of Thermal Conductivity)
01:32:26 -
1.2 Introduction of Heat Transfer (Laws of Heat Transfer)
38:31
Chapter-2 Conduction
-
2.1 Conduction (Trough a Slab, Electrical Analogy of Heat Transfer, Conductive Thermal Resistance and through composite Slab)
28:07 -
2.2 Conduction (Convection Thermal Resistance, Conduction-Convection Heat Transfer through a composite Slab, Overall Heat Transfer Co-efficient and some examples)
55:33 -
2.3 Conduction (Radial Conduction Heat Transfer through a hollow cylinder & Composite Cylinder and an Example)
28:28 -
2.4 Conduction (Conduction Convection Heat Transfer through a Composite Cylinder and an Example)
22:56 -
2.5 Conduction (Generalized Conduction Equation and Thermal Diffusivity)
42:30 -
2.6 Conduction (Critical Radius of Insulation & Its Physical Significance and Some Examples)
31:47 -
2.7 Conduction (Heat Generation in a slab and an Example)
29:11 -
2.8 Conduction (Radial Conduction Heat Transfer through a Hollow Sphere, Critical Radius of Insulation for Spherical Condition and Variable Thermal Conductivity)
49:48 -
2.9 Conduction (Heat Generation in Cylinder or Wire and an Example based on internal Heat Generation)
01:19:17 -
2.10 GATE Questions – Conduction
01:17:44
Chapter-3 Extended Surfaces (Fins) and Unsteady State Heat Conduction
-
3.1 Basics of Heat Transfer through Extended Surfaces (Fins)
18:05 -
3.2 Analysis of Rectangular Fin having Infinite Length
37:48 -
3.3 Analysis of Rectangular Fin having Finite Length and Insulated at its Tip
25:26 -
3.4 Analysis of Rectangular Fin having Finite Length and Convicted Heat from its Tip
21:01 -
3.5 Heat Transfer through Rod Connected two Heat Source at Different Temperature
12:53 -
3.6 Infinite Long Fin Approximation
35:28 -
3.7 Fins Efficiency and Effectiveness
32:40 -
3.8 Unsteady State (Transient) Heat Conduction
56:31 -
3.9 Examples based on Unsteady State Heat Conduction
23:15 -
3.10 fins-and-unsteady-gate-questions-ht.mp4
16:13
Chapter-4 Heat Exchangers
-
4.1 Basics Concepts and Classification of Heat Exchanger
37:11 -
4.2 Temperature Profile of Heat Exchanger
18:46 -
4.3 Logarithmic Mean Temperature Difference
47:54 -
4.4 Example Based on Logarithmic Mean Temperature Difference
09:09 -
4.5 Special Cases Regarding Logarithmic Mean Temperature Difference
17:52 -
4.6 Design of Heat Exchanger by Logarithmic Mean Temperature Difference Method
15:11 -
4.7 Effectiveness of Heat exchangers
15:36 -
4.8 Effectiveness of Parallel and Counter Flow Heat exchangers
46:19 -
4.9 Design of Heat Exchanger by Effectiveness-NTU Method
13:58 -
4.10 410-heat-exchangers-gate-questions-ht
29:01
Chapter-5 Radiation
-
5.1 Fundamentals of Thermal Radiation
36:28 -
5.2 Basic Definition/Terminologies of Thermal Radiation
30:37 -
5.3 Laws of Thermal Radiation (Kirchhoff,Planck,Wiens displacement,Stefan-Boltzmann & Lambert Cosine)
53:39 -
5.4 Shape Factor (Concept of shape factor & Shape factor Relations like Reciprocity,Summation,superposition & Symmetrycity etc)
45:02 -
5.5 Radiation Network & Radiation Exchange
46:55 -
5.6 Radiation Shields & Radiation effect in Temperature Measurement
36:44 -
5.7 GATE Questions Radiation
36:42
Chapter-6 Convection
-
6.1 Introduction to Convection Heat Transfer
18:12 -
6.2 Basics of Forced Convection Heat Transfer
38:32 -
6.3 Thermal Boundary Layer Concept
44:21 -
6.4 External Forced Convection ( Flow over a flat plate )
35:25 -
6.5 Internal Forced Convection (Flow through Pipe or duct )
49:58 -
6.6 Natural or Free Convection-1
15:42 -
Convection Gate Questions
16:42
Chapter-7 Gate Questions
-
7.1 Gate Questions
32:28 -
7.2 Gate Questions
31:53 -
7.3 Gate Questions
26:49 -
7.4 Gate Questions
34:12 -
7.5 Gate Questions
43:09
E-Book – Heat Transfer
-
E-Book
Practice Set – Heat Transfer
-
Practice Set 1
-
Practice Set 2
Mock Test – Heat Transfer
-
Mock Test 1
-
Mock Test 2
Module – Refrigeration & AC
Chapter 1: Properties of Pure Substances
-
1.1 Concept of Pure substance & Table and Charts like P-V , T-S & P-T Plot
01:17:11 -
1.2 Properties of Pure Substance and its Calculation , H-S Plot
35:54 -
1.3 Ideal gas equation , behavior of Ideal & Real gases and Reduced temperature & Pressure Concept.
41:35 -
1.4 Examples on Properties of Pure Substance
23:09 -
1.5 Gate Question on Properties of Pure Substance.
22:47
Chapter 2: Basics of Refrigeration and Air Refrigeration
-
2.1 Basics of Refrigeration
43:09 -
2.2 Air Refrigeration (Reversed Brayton Cycle )
20:31
Chapter 3: Refrigerants
-
3.1 Refrigerants
54:20
Chapter 4: Vapour Compression Refrigeration System (VCRS)
-
4.1 Basics of Vapour Compression Refrigeration System
33:53 -
4.2 Various Conditions of Vapour Compression Refrigeration System
55:40 -
4.3 Various effect on Vapour Compression Refrigeration System
32:26
Chapter 5: Vapour Absorption Refrigeration System (VARS)
-
5.1 Basics of VARS
33:53 -
5.2 Advancement of Theoretical VARS Cycle
46:03
Chapter 6: Psychrometry & Its Process
-
6.1 Introduction to Air Conditioning
42:43 -
6.2 Psychrometry Part-I
58:45 -
6.3 Psychrometry Part-II
53:54
Chapter 7: GATE Questions
-
7.1 GATE Questions – I
41:00 -
7.2 GATE Questions – II
24:35 -
7.3 GATE Questions – III
25:37 -
7.4 GATE Questions – IV
32:10 -
7.5 GATE Questions – V
25:36 -
7.6 GATE Questions – VI
28:35 -
7.7 GATE Questions – VII
23:56
E-Book – Refrigeration & Air Conditioning
-
E-Book
Practice Set – Refrigeration & Air Conditioning
-
Practice Set 1
-
Practice Set 2
Mock Test – Refrigeration & AC
-
Mock Test 1
-
Mock Test 2
Module – Strength of Materials
Chapter 1: Load & its Effect
-
1.1 Load & is Effect Part 1
01:05:36 -
1.2 Load & is Effect Part 2
01:54:54 -
1.3 Load & is Effect Part 3
01:20:02 -
1.4 Load & is Effect Part 4
01:01:18 -
1.5 Load & is Effect Part 5
55:48 -
1.6 Load & is Effect GATE Questions
30:08 -
1.7 Load & is Effect GATE Questions
11:57
Chapter 2: Basic Concept Of SOM
-
2.1 Basic Concept of SOM Part 1
01:11:50 -
2.2 Basic concept of SOM Part 2
01:11:14 -
2.3 Basic concept of SOM Part 3
55:58 -
2.4 Basic concept of SOM Part 4
01:06:43 -
2.5 Basic concept of SOM GATE Questions
17:10 -
2.6 Basic concept of SOM GATE Questions Part-1
31:56 -
2.7 Basic concept of SOM GATE Questions Part-2
30:45
Chapter 3: Axial Stress
-
3.1 Axial Stress ( Bars in Series )
01:04:09 -
3.2 Axial Stress ( Elongation of Different Session )
01:15:49 -
3.3 Axial Stress ( Bars in Parallel )
32:38 -
3.4 Axial Stress ( Thermal Stress )
01:09:04 -
3.5 Axial Stress And Thermal Stress GATE Questions
43:08 -
3.6 Axial Stress And Thermal Stress GATE Questions Part-1
33:56 -
3.7 Axial Stress And Thermal Stress GATE Questions Part-2
26:51
Chapter 4: Bending Stress
-
4.1 Bending Equation
01:19:11 -
4.2 Examples based on Bending Equation
57:11 -
4.3 Beam Of Uniform Strength & Bending of Wire
36:43 -
4.4 Bending Stress GATE Questions
21:47
Chapter 5: Direct Shear Stress
-
5.1 Direct Shear Stress & Its Distribution
01:07:52 -
5.2 Examples on Direct Shear Stress
46:19 -
5.3 Shear Center
28:10 -
5.4 Direct Shear Stress GATE Questions
13:57
Chapter 6: Pure Torsion
-
6.1 Torsion Equation
01:40:43 -
6.2 Examples on Pure Torsion
34:28 -
6.3 Pure Torsion (Bars in series & parallel)
01:22:37 -
6.4 Pure Torsion Gate Questions
38:34
Chapter 7: Combined Stress and Strain
-
7.1 Combined Stress and Strain Part 1
01:40:43 -
7.2 Combined Stress ans Strain Part 2
01:03:07 -
7.3 Examples Based on Combined Stress and Strain
01:03:01 -
7.4 Theory Of Failure
49:34 -
7.5 Mohr’s Circle
01:11:45 -
7.6 Combined Stress and Strain GATE Questions
32:43
Cheater 8: Column & Pressure Vessel
-
8.1 Cylindrical is Spherical
01:22:11 -
8.2 Column & Struts
01:25:25 -
8.3 Pressure Vessel & Column GATE Questions
27:02
Chapter 9: SFD and BMD
-
9.1 Beam Load & Support
01:05:01 -
9.2 Examples on Reaction Calculation
49:08 -
9.3 Shear Force & Bending moment
01:39:57 -
9.4 Examples on Shear Force & Bending Moment
59:25 -
9.5 SFD & BMD GATE Questions
45:50
Chapter 10: Slope & Deflection
-
10.1 Slope & Deflection Part 1
01:35:10 -
10.2 Examples on Slope & Deflection Part 2
01:08:42 -
10.3 Slope & Deflection Part 3
47:56 -
10.4 Slope & Deflection GATE Questions
01:01:15
Chapter 11: Shear Centre
-
11.1 Shear Centre
35:59
Chapter 12: GATE Questions
-
Gate questions vid -1
46:37 -
Gate questions vid -2
43:35 -
Gate questions vid -3
48:52 -
Gate questions vid -4
36:08 -
Gate questions vid -5
39:47 -
Gate questions vid -6
31:11
E-Book – Strength of Materials
-
E-Book
Practice Set – Strength of Materials
-
Practice Set 1
-
Practice Set 2
Mock Test – Strength of Materials
-
Mock Test 1
-
Mock Test 2
Module – Theory of Machines
Chapter-1 Simple Mechanisms
-
1.1 Theory of Machines Introduction
20:50 -
1.2 Kinematic Link or an Element and Kinematic Pairs
36:22 -
1.3 Classification of Kinematic Pairs
39:01 -
1.4 Kinematic Chains
10:38 -
1.5 Degree of Freedom
24:24 -
1.6 Kutzbach Equation and Gruibler’s Criterion
30:28 -
1.7 Simple Mechanisms, its inversions and Grashof’s law
42:42 -
1.8 Inversion of Single Slider Crank Mechanism
01:10:50 -
1.9 Inversion of Double Slider Crank Mechanism
22:59 -
1.10 Mechanical Advantage and Miscellaneous
27:13 -
1.11 Chapter-1 GATE Questions
17:01
Chapter-2 Velocity and Acceleration Analysis
-
2.1 Introduction to Instantaneous Center
35:13 -
2.2 Kennedy’s Theorem and Instantaneous Center Approach
31:18 -
2.3 Theorem of Angular Velocity
21:50 -
2.4 Relative Velocity Approach
57:58 -
2.5 Acceleration Analysis
59:42 -
2.6 GATE Questions
41:38
Chapter-3 Gears and Gear Trains
-
3.1 Introduction and Classification of Gears
57:26 -
3.2 Gear Terminology and Law of Gearing
50:09 -
3.3 Involute Profile of Gear Teeth
48:33 -
3.4 Interference in Gears and Elimination of Interference
31:35 -
3.5 Cycloidal Profile of Gear Teeth
11:06 -
3.6 Gear Trains part-I
58:30 -
3.7 Gear Trains part-II
46:04 -
3.8 GATE Questions
21:30
Chapter-4 Analysis of Single Slider Crank Mechanism
-
4.1 Kinematic & Dynamics Analysis and Offset Slider Crank Mechanism
01:00:27 -
4.2 Chapter-4 GATE Questions
18:43
Chapter-5 Flywheel
-
5.1 Turning Moment Diagram and Principle of working of Flywheel
51:52 -
5.2 Fundamental Equation of Flywheel and Requirement of Flywheel for Multi cylinder Engine
52:16 -
5.3 Types of Flywheel and Flywheel in Punching Press
37:16 -
5.4 Chapter-5 GATE Questions
17:24
Chapter-6 Governors
-
6.1 Introduction of Governors and Watt’s Governor
36:32 -
6.2 Porter and Proell Governor
30:25 -
6.3 Hartnell Governor and Physical Characteristics of Governors
49:11 -
6.4 Governor Controlling Force and Controlling Force Diagram
42:51 -
6.5 Standard Questions on Governors
18:38
Chapter-7 Balancing
-
7.1 Introduction and Static Balancing of Rotating Masses
49:29 -
7.2 Dynamic Balancing of Rotating Masses
22:01 -
7.3 Primary Balancing of Reciprocating Masses
58:16 -
7.4 Secondary Balancing of Reciprocating Masses and Role of Firing order in Balancing
01:09:08 -
7.5 Direct and Reverse Crank Method
24:18 -
7.6 Chapter-7 GATE Questions
16:56
Chapter-8 Mechanical Vibrations
-
8.1 Introduction of Vibrations and Natural Vibrations
48:00 -
8.2 Energy Method and Torque Method
01:22:27 -
8.3 Torsional Vibration and Religh’s Method
01:02:42 -
8.4 Damped Vibration Systems
01:28:44 -
8.5 Force Damped Vibration and Magnification Factor
48:39 -
8.6 Vibration Isolation, Transmissibility Ratio and Critical Speed of Shaft
32:13 -
8.7 Chapter-8 GATE Questions
39:08
Chapter-9 Cams and Followers
-
9.1 Introduction of Cams & Followers and their Classification
34:11 -
9.2 Cam Terminologies and Followers Derivatives
36:16 -
9.3 Types of Follower Motion
01:01:58 -
9.4 Standard Questions on Cams and Followers
14:58
Chapter-10 Gyroscope
-
10.1 Introduction of Gyroscope
41:14 -
10.2 Gyroscopic Effects for Aircraft and Ships
35:33 -
10.3 Gyroscopic Effect for a Power plant Shaft and Automobile
28:29
E-Book – Theory of Machines
-
E-Book
Practice Set – Theory of Machines
-
Practice Set 1
-
Practice Set 2
Mock Test – Theory of Machines
-
Mock Test 1
-
Mock Test 2
Module – Material Science
Chapter 1: Structure of Material
-
1.1 Structure Of Material – Part – I
01:25:01 -
1.2 Structure Of Material – Part – II
01:22:52
Chapter 2: Properties of Material & Testing
-
2.1 Properties Of Material & Testing – Part – I
53:48 -
2.2 Properties Of Material & Testing Part – II
01:25:53 -
2.3 Properties Of Material & Testing Part – III
52:04
Chapter 3: Phase Diagram
-
3.1 Phase Diagram & Hume Rothery Rules
23:44 -
3.2 Gibs Phase Rule & Lever Arm Rule
29:47 -
3.3 Types Of Phase Diagram
52:39 -
3.4 Transfomation-I
34:53 -
3.5 Transformation-II
59:10 -
3.6 Transformation-III
57:41 -
3.7 Martensitic & Bainitic Transformation
42:37 -
3.8 Cast Iron & Effects Of Alloying On Steel
17:29
Chapter 4: Heat Treatment
-
4.1 Introduction to Heat Treatment & Hardening Process
01:33:59
Chapter 5: GATE Questions
-
5.1 Gate Questions
50:05
E-Book – Material Science
-
E-Book
Practice Set – Material Science
-
Practice Set 1
-
Practice Set 2
Mock Test – Material Science
-
Mock Test 1
-
Mock Test 2
Module – Verbal Ability
Chapter 1: Noun
-
1.1 Noun
01:08:39
Chapter 2: Pronoun
-
2.1 Pronoun
01:44:52
Chapter 3: Subject and Verb Agreement
-
3.1 Subject And Verb Agreement
01:17:39
Chapter 4: Tenses
-
4.1 Tenses
55:33
Chapter 5: Modifiers
-
5.1 Modifiers_Part_1
43:32 -
5.2 Modifiers_Part_2
01:05:44
Chapter 6: Vocabulary Building
-
6.1 Introduction to Vocabulary
01:08:20 -
6.2 Vocabulary – Root Words
56:20 -
6.3 Facts | Inferences | Judgements
45:40
Chapter 7: Verbal Logic
-
7.1 Course of Action
37:19 -
7.2 Critical Reasoning
42:46 -
7.3 Statement, Assumption & Conclusion
44:09 -
7.4 Deductive Logic & Logical Consistency
01:16:06
Chapter 8: Reading Comprehension (RC)
-
8.1 Introduction to Reading Comprehension
27:24 -
8.2 Reading Comprehension -1 (How to solve RC Questions )
50:46 -
8.3 Reading Comprehension tones
01:06:16
Chapter 9: Articles & Prepositions
-
9.1 Articles & Prepositions
01:20:05
E-Book – Verbal Ability
-
E-Book
Practice Set – Verbal Ability
-
Practice Set 1
-
Practice Set 2
Mock Test – Verbal Ability
-
Mock Test 1
-
Mock Test 2
Module – Logical Reasoning
Chapter 1: Series
-
1.1 Series
25:12
Chapter 2: Coding and Decoding
-
2.1 Coding and Decoding
13:29
Chapter 3: Analytical Reasoning (AR) or Data Arrangement
-
3.1 Data arrangement
39:34
Chapter 4: Blood Relations
-
4.1 Blood Relations
11:59
Chapter 5: Clock and Calendars
-
5.1 Clock
20:30 -
5.2 Calendars
23:53
Chapter 6: Data Interpretation
-
6.1 Data interpretation
26:04
Chapter 7: Directions
-
7.1 Directions
11:09
Chapter 8: Syllogism
-
8.1 Syllogism
16:33
E-Book – Logical Reasoning
-
E-Book
Practice Set – Logical Reasoning
-
Practice Set 1
-
Practice Set 2
Mock Test – Logical Reasoning
-
Mock Test 1
-
Mock Test 2
Module – Manufacturing Engineering
Chapter 1: Metal Casting
-
1.1 Basics of Metal Casting
38:10 -
1.2 Allowances in Casting
01:04:59 -
1.3 Types of Pattern and its materials
27:33 -
1.4 Mould Making & Properties of Sand
01:03:44 -
1.5 Core Making
25:42 -
1.6 Paddings & Chills
22:59 -
1.7 Pouring & Solidifications
36:51 -
1.8 Gating System
44:03 -
1.9 Aspiration Effect
21:04 -
1.10 Solidifications Type, Time and Felting & Inspections
10:46 -
1.11 Riser & Riser Design
01:02:37 -
1.12 Riser for plate & Disc shaped casting
16:14 -
1.13 Special Casting
53:57 -
1.14 Defects in Casting
19:20 -
1.15 Metal Casting GATE Questions
38:16
Chapter 2: Metal Forming
-
2.1 Introduction of Metal Forming
23:18 -
2.2 Strain Hardening
32:07 -
2.3 Yield Point Phenomenon & Hot Working
01:07:13 -
2.4 Flow stress & Flow curve Equations
57:30 -
2.5 Plastic Deformation & Yield Criteria
22:41 -
2.6 Rolling Process
01:04:56 -
2.7 Wire drawing
01:14:09 -
2.8 Tube Drawing & Extrusion Process
01:00:32 -
2.9 Forging Operations
01:04:00 -
2.10 Defects in Metal Forming
15:27 -
2.11 Metal Forming GATE Questions
28:52
Chapter 3: Sheet Metal Operations
-
3.1 Sheet Metal Operations
01:41:28 -
3.2 Deep Drawing
01:09:18 -
3.3 Bending & Minor Sheet Metal Operations
35:43 -
3.4 Special Metal Forming Processes
32:30 -
3.5 Sheet Metal Operations Gate Questions
33:45 -
3.6 Sheet Metal Operations Gate Questions
33:45
Chapter 4: Metal Cutting
-
4.1 Introduction to Metal cutting
58:49 -
4.2 Influence of tool geometry on various parameters
39:27 -
4.3 Mechanics of Machining
36:01 -
4.4 Shear Angle, Velocities, Shear Strain & Rate of Shear Strain
37:48 -
4.5 Orthogonal and oblique Cutting
29:24 -
4.6 Force in the Metal Cutting Operation
42:59 -
4.7 Shear Stress, Work Done & Specific Cutting Energy
55:01 -
4.8 Heat Generations in Cutting
13:40 -
4.9 Tool Failure Criteria & Tool Life
41:44 -
4.10 Economics of Machining
19:55 -
4.11 Conversion of Oblique Cutting to Orthogonal Cutting
52:56 -
4.12 Tool Materials
30:05 -
4.13 Grinding Operations
32:20 -
4.14 Metal Cutting GATE Questions
57:02
Chapter 5: Non Traditional Machining
-
5.1 Non Traditional Machining-I (AJM,USM & ECM )
01:05:51 -
5.2 Non Traditional Machining-II (EDM,EBM,LBM& USM )
32:02 -
5.3 Non Traditional Machining GATE Questions
26:23
Chapter 6: Computer Integrated Manufacturing System
-
6.1 Introduction to advanced Machining Methods
10:06 -
6.2 Computer Integrated Manufacturing-I
01:18:11 -
6.3 Computer Integrated Manufacturing-II
37:38 -
6.4 Computer Integrated Manufacturing GATE Questions
19:56
Chapter 7: Welding
-
7.1 Gas Welding
01:24:26 -
7.2 Arc and Thermit Welding
39:02 -
7.3 Resistance Welding
36:42 -
7.4 Soldering, Brazing & Braze Welding
22:48 -
7.5 Setting of Power Sources
56:31 -
7.6 Welding GATE Questions
40:12
Chapter 8: Metrology and Inspection
-
8.1 Introduction of Metrology and Linear Measurements
37:23 -
8.2 Limits, Fits and Tolerances Part-1
01:02:53 -
8.3 Limits, Fits and Tolerances Part-2
30:50 -
8.4 Comparators
41:16 -
8.5 Form and Finish Measurement
57:12 -
8.6 Limit Gauges Part-1
39:44 -
8.7 Limit Gauges Part-2
58:17 -
8.8 Angular Measurements
46:10 -
8.9 Machine Tool Metrology (Alignment & Testing Methods)
52:42 -
8.10 Metrology and Inspection GATE Questions
18:21
Chapter 9: Machining and Machine Tool Operations
-
9.1 Machining and Machine Tool Operations
01:13:09 -
9.2 Machining and Machine Tool Operations
01:32:32 -
9.3 Machining and Machine Tool Operations
01:17:59
Chapter 10: Metrology and Inspection
-
10.1 Metrology and Inspection
01:35:04
Chapter 11: Computer Integrated Manufacturing
-
11.1 Computer Integrated Manufacturing
57:02
E-Book – Manufacturing Engineering
-
E-Book
Practice Set – Manufacturing Engineering
-
Practice Set 1
-
Practice Set 2
Mock Test – Manufacturing Engineering
-
Mock Test 1
-
Mock Test 2
Module – Machine Design
Chapter 1: Fundamentals of Machine Design
-
1.1 Brief overview of Design
20:10 -
1.2 Loads and Its Effects-I
26:57 -
1.3 Loads and Its Effects-II
26:57
Chapter 2: Design of Machine Elements under Static & Combined Loading
-
2.1 Design of Machine Elements under Static Loading-I
37:23 -
2.2 Design of Machine Elements under Static Loading-II
45:39 -
2.3 Design of Machine Elements under Combined Loading
13:08
Chapter 3: Theories of Failure
-
3.1 Theories of Failure-I
25:59 -
3.2 Theories of Failure-II
23:53 -
3.3 Theories of Failure-III
23:50 -
3.4 Chapter-3 GATE Questions
14:06
Chapter 4: Design of Machine Elements under Fatigue Loading
-
4.1 Fatigue Consideration in Design
30:31 -
4.2 Stress Concentration Effect
30:37 -
4.3 Design Approach for Fatigue Loading
16:56 -
4.4 Chapter-4 GATE Questions
21:19
Chapter 5: Design of Shafts and springs
-
5.1 Design of Shafts
27:25 -
5.2 Design of springs
20:49 -
5.3 GATE Questions
06:56
Chapter 6: Design of Brakes
-
6.1 Design of Block (shoe) Brakes
38:33 -
6.2 Design of Band Brakes
24:49 -
6.3 GATE Questions
27:49
Chapter 7: Design Of Bearings
-
7.1 Design of Bearings Part – I
45:25 -
7.2 Design of Bearings Part – II
01:01:58 -
7.3 Design of Bearings Part – III
01:08:48 -
7.4 Gate Questions
27:05
Chapter 8: Design of clutches
-
8.1 Design of clutches
31:40
Chapter 9: Design of Joints
-
9.1 Design of Joints Part-1
55:46 -
9.2 Design of Joints Part-2
58:07 -
9.3 Design of Joints Part-3
01:16:33 -
9.4 Design of Joints GATE Questions
22:12
Chapter 10: Design Of Gears
-
10.1_Design Of Gears(MD)
57:32 -
10.2_Design Of Gears(MD)
01:17:29 -
10.3_Design Of Gears(MD)
01:15:22 -
10.4_Design Of Gears(MD)
01:17:15
E-Book – Machine Design
-
E-Book
Practice Set – Machine Design
-
Practice Set 1
-
Practice Set 2
Mock Test – Machine Design
-
Mock Test 1
-
Mock Test 2
Module – Industrial Engineering
Chapter 1: Basic of Industrial Engineering
-
1.1 Basic of Industrial Engineering
14:33 -
1.2 Break Even Analysis
41:16 -
1.3 Gate Questions
08:34
Chapter 2: Inventory Control
-
2.1 Basic Inventory Control
33:04 -
2.2 Deterministic Model Part 1
01:19:42 -
2.3 Deterministic Model Part 2
51:55 -
2.4 Probability & Inventory Management Technique
01:06:24 -
2.5 Gate Questions
15:06
Chapter 3: Fore Casting
-
3.1 Fore Casting
01:00:35 -
3.2 Gate Questions
12:12
Chapter 4:Queuing Theory
-
4.1 Queuing Theory
43:09 -
4.2 GATE Question
07:10
Chapter 5: Sequencing
-
5.1 Sequencing
42:34 -
5.2 GATE Questions
09:27
Chapter 6: Project Management
-
6.1 Basic Introduction Project Management
01:01:06 -
6.2 PEAR
57:33 -
6.3 Critical Path Method
53:07 -
6.4 Gate Questions
30:47
Chapter 7: Linear Programming
-
7.1 Graphical Methods
01:06:27 -
7.2 Simplex Method
47:59 -
7.3 Transportation
01:19:55 -
7.4 GATE Questions
23:23
E-Book – Industrial Engineering
-
E-Book
Practice Set – Industrial Engineering
-
Practice Set 1
-
Practice Set 2
Mock Test – Industrial Engineering
-
Mock Test 1
-
Mock Test 2
Practice and Doubt Session
Chapter 1: Quantitative Aptitude
-
1.1 Quantitative Aptitude
01:34:35 -
1.2 Quantitative Aptitude
01:23:11
Chapter 2: Engineering Mathematics
-
2.1 Engineering Mathematics
01:12:01 -
2.2 Engineering Mathematics
02:28:21 -
2.3 Engineering Mathematics
01:35:29 -
2.4 Engineering Mathematics
04:01:03
Chapter 3: Engineering Mechanics
-
3.1 Engineering Mechanics
02:07:16
Chapter 4: Thermodynamics
-
4.1 Thermodynamics
28:30 -
4.2 Thermodynamics
59:27
Chapter 5: Manufacturing Engineering
-
5.1 Manufacturing Engineering
03:32:03 -
5.2 Manufacturing Engineering
03:21:27
Chapter 6: Fluid Mechanics
-
6.1 Fluid Mechanics
02:17:53
Chapter 7: Strength of Materials
-
7.1 Strength of Materials
01:05:36 -
7.2 Strength of Materials
01:54:54
Chapter 8: ATD, RAC, IC Engine, Power Cycle (PS)
-
8.1 ATD, RAC, IC Engine, Power Cycle (PS)
23:37
Chapter 9: Heat Transfer
-
9.1 Heat Transfer
02:00:19
Chapter 10: Machine Design
-
10.1 Machine Design
02:13:53
E-Book – Practice and Doubt Session
-
E-Book
Revision for GATE With Most Important Topics
Chapter 1: Concept of Gateflix Revision
-
1.1 Concept of Gateflix Revision
01:18
Chapter 2: Heat Transfer Revision
-
2.1 Basics of Heat Transfer & its Mode
39:42 -
2.2 Conduction Through a Slab
10:48 -
2.3 Conduction Heat Transfer through Composite Cylinder
09:43 -
2.4 Critical Radius of Insulation
21:08 -
2.5 Conduction (Heat Generation in Cylinder or Wire)
55:07 -
2.6 Logarithmic Mean Temperature Difference (Special Cases)
19:45 -
2.7 Design of Heat Exchanger by Effectiveness NTU Method
14:31 -
2.8 Shape Factor or View Factor
44:55 -
2.9 Radiation Network & Radiation Exchange
38:13 -
2.10 Basics of Forced Convection Heat Transfer
39:19 -
2.11 Forced Convection (Flow over Plate)
24:49 -
2.12 Forced Convection (Internal Flow)
45:05
Chapter 3: Thermodynamics Revision
-
3.1 Non Flow Work Transfer in Various Processes
36:27 -
3.2 First Law of Thermodynamics
22:40 -
3.3 Free Expansion
15:29 -
3.4 Steady Flow Energy & Work Flow
51:34 -
3.5 Second Law of Thermodynamics
32:38 -
3.6 Entropy Change for Ideal Gas
14:51 -
3.7 Exergy & Exergy Change Due to Finite Temperature Difference
30:51 -
3.8 Exergy Associated with K.E. & P.E.
33:20 -
3.9 Joule-Thomson Coefficient & Clapeyron Equation
48:54 -
3.10 Pure Substances
37:44
Chapter 4: Engineering Mechanics Revision
-
4.1 Concurrent Force System
28:22 -
4.2 Tips to Draw Free Body Diagram
31:17 -
4.3 Analysis of Plane Trusses
26:20 -
4.4 Newton’s Law of Motion
37:27 -
4.5 Friction
42:18 -
4.6 Circular Motion and Projectile Motion
01:00:36 -
4.7 Linear Momentum of Particles and Systems
17:35 -
4.8 Work and Energy
38:40 -
4.9 Collision Theory
27:07 -
4.10 Dynamics of Rigid Bodies – II
22:02 -
4.11 Dynamics of Rigid Bodies – III
07:38 -
4.12 Kinetic Energy in Pure Rolling
05:34 -
4.13 Dynamics of Rigid Bodies – IV
16:22
Chapter 5: Fluid Mechanics Revision
-
5.1 Surface Tension
11:47 -
5.2 Fluid Translation, Rotation & Deformation – I
01:02:16 -
5.3 Fluid Translation, Rotation & Deformation – II
01:20:03 -
5.4 Comparison of Turbines
11:01 -
5.5 Concept of Specific Speed
16:13 -
5.6 Degree of Reaction
08:47 -
5.7 Dimensionless Numbers
06:07 -
5.8 Forces on Plane Surfaces Immersed in Fluid at Rest
27:22 -
5.9 Pitot Tube
04:54 -
5.10 Stability Condition of Fully Submerged Bodies
13:11 -
5.11 Stability Condition of Partially Submerged Bodies
20:55 -
5.12 U Tube Manometer (Negative)
07:38 -
5.13 U Tube Manometer (Positive)
09:13 -
5.14 Understanding Discharge & Mass Flow Rate
15:39 -
5.15 Velocity Diagram for Centrifugal Pump Impeller
08:44 -
5.16 Velocity Diagrams
15:25
Chapter 6: Refrigeration & Air Conditioning
-
6.1 VCRS
01:19:50 -
6.2 Basics of Psychrometry
41:49
Chapter 7: Applied Thermodynamics Revision
-
7.1 Gas Turbine (Brayton Cycle)
44:35 -
7.2 Steam Turbine (Rankine Cycle)
28:41 -
7.3 Air Compressor
20:44 -
7.4 I.C. Engine – Otto Cycle & Diesel Cycle
35:12
Chapter 8: Machine Design
-
8.1 Theories of Failure – I
25:59 -
8.2 Theories of Failure – II
23:53 -
8.3 Fatigue Consideration in Design
30:31 -
8.4 Design Approach for Fatigue Loading
16:56 -
8.5 Design of Springs
20:49 -
8.6 Design of Riveted Joints – II
24:33
Chapter 9: Industrial Engineering Revision
-
9.1 Break-Even Analysis
32:39 -
9.2 Forecasting
29:36 -
9.3 Queuing Theory
32:36 -
9.4 PERT (Program Evaluation Review Technique)
57:32 -
9.5 Critical Path Method (CPM)
53:06 -
9.6 Graphical Methods
18:58 -
9.7 Special Cases in Graphical Methods
09:01 -
9.8 Transportation
01:07:32
Chapter 10: Strength of Materials Revision
-
10.1 Stress and Strain Diagram of Mild Steel
01:20:29 -
10.2 Axial Stress in Bars
01:04:09 -
10.3 Bars in Parallel
08:58 -
10.4 Bending Equation
01:19:11 -
10.5 Pure Torsion Equation
01:30:23 -
10.6 Mohr Circle
18:13 -
10.7 Pressure Vessels
39:44 -
10.8 Column & Struts
20:07
Chapter 11: Theory of Machines Revision
-
11.1 Kutzbach Equation and Gruebler’s Criterion
19:45 -
11.2 Simple Mechanism, its Inversions, and Grashof’s Law
42:42 -
11.3 Single Slider Crank Mechanism and its Inversions
01:10:50 -
11.4 Kennedy’s Theorem and Instantaneous Centre Approach
13:25 -
11.5 Relative Velocity Approach
57:58 -
11.6 Gear Trains – Part II
41:33 -
11.7 Introduction and Static Balancing of Rotating Masses
36:49 -
11.8 Introduction to Vibrations and Natural Vibrations
48:00 -
11.9 Energy Method and Torque Method
01:22:27 -
11.10 Torsional Vibration and Rayleigh’s Method
01:02:42 -
11.11 Damped Vibration Systems
01:28:44 -
11.12 Gyroscopic Effects for Aircraft and Ships
35:33
Chapter 12: Manufacturing Revision
-
12.1 Basics of Metal Casting
26:25 -
12.2 Allowances
01:04:59 -
12.3 Pouring & Solidification
36:51 -
12.4 Solidification Types, Time, and Inspections
10:46 -
12.5 Riser & Riser Design
27:51 -
12.6 Rolling Process
01:04:56 -
12.7 Wire Drawing
01:14:09 -
12.8 Tube Drawing & Extrusion Process
13:54 -
12.9 Forging Operations
17:47
E-Book – Revision for GATE With Most Important Topics
-
E-Book
Practice Set – Revision for GATE With Most Important Topics
-
Practice Set 1
-
Practice Set 2
GATE Mechanical Engineering (Newly Added Topics)
Chapter 1: Engineering Mechanics
-
1.1 Belt Pulley
01:33:01 -
1.2 Wedges
01:02:58 -
1.3 Application of Wedges-Power Screw
01:28:17 -
1.4 Rolling Friction
01:00:17 -
1.5 Langrange’s Equation Part -1
02:34:39 -
1.6 Langrange’s Equation Part -2
47:30
Chapter 2: Mechanics of Material (SOM)
-
2.1 MECHANICS OF MATERIAL (SOM)
35:59
Chapter 3: Fluid Mechanics
-
3.1 Fluid Mechanics
01:08:12 -
3.2 Fluid Mechanics
01:45:20
Chapter 4: Thermodynamics
-
4.1 Thermodynamics
35:11
Chapter 5: Machining and Machine Tool Operations
-
5.1 NC and CNC Machine
01:13:09 -
5.2 NC Machine and CNC Programming
01:32:32 -
5.3 CNC Programming
01:17:59
Chapter 6: Metrology and Inspection
-
6.1 Metrology and Inspection
01:35:04
Chapter 7: Computer Integrated Manufacturing
-
7.1 Computer Integrated Manufacturing
01:35:04
Chapter 8: Aptitude
-
8.1 Aptitude
56:41
Chapter 9: Engineering Mathematics
-
9.1 Engineering Mathematics
29:47 -
9.2 Engineering Mathematics
27:29 -
9.3 Engineering Mathematics
45:11 -
9.4 Engineering Mathematics
31:50 -
9.5 Engineering Mathematics
34:31 -
9.6 Engineering Mathematics
38:03
Chapter 10: Industrial Engineering (Latest)
-
10.1 Industrial Engineering (Latest)
01:13:43 -
10.2 Industrial Engineering (Latest)
01:21:25 -
10.3 Industrial Engineering (Latest)
01:26:25 -
10.4 Industrial Engineering (Latest)
01:37:19 -
10.5 Industrial Engineering (Latest)
01:04:45 -
10.6 Industrial Engineering (Latest)
01:03:09 -
10.7 Industrial Engineering (Latest)
01:05:40 -
10.8 Industrial Engineering (Latest)
01:15:46 -
10.9 Industrial Engineering (Latest)
01:19:32 -
10.10 Industrial Engineering (Latest)
01:23:14 -
10.11 Industrial Engineering (Latest)
01:24:22 -
10.12 Industrial Engineering (Latest)
01:00:13 -
10.13 Industrial Engineering (Latest)
01:40:55 -
10.14 Industrial Engineering (Latest)
53:19
E-Book – GATE -(New Topics)
-
E-Book
Practice Set – GATE -(New Topics)
-
Practice Set 1
-
Practice Set 2
GATE Mechanical Engineering PYQ video Solutions [2020 – 2025]
GATE Mechanical Engineering PYQ video Solutions – 2020
-
Application of Thermodynamics-set1(Morning)
19:46 -
Engineering Mechanics-set1(Morning)
13:59 -
Fluid Mechanics-set1- PART-1(Morning)
08:11 -
Fluid Mechanics-set1-PART-2(Morning)
21:01 -
Heat Transfer-set1(Morning)
27:46 -
Industrial Engineering-set1(Morning)
22:41 -
Machine Design-set1(Morning)
19:44 -
Manufacturing Engineering-set1(Morning)
59:55 -
Strength of material-set1(Morning)
39:33 -
Theory of Machine-set1(Morning)
50:39 -
Material Science-set1(Morning)
03:39 -
Heat Transferset-set1-PART-2(Afternoon)
52:34 -
Application of Thermodynamics-set2(Afternoon)
21:59 -
Engineering Mechanics-set2(Afternoon)
07:37 -
Fluid Mechanics-set2(Afternoon)
24:13 -
Industrial Engineering-set2(Afternoon)
18:36 -
Machin Design-set2(Afternoon)
18:57 -
Manufacturing Engineering-set2-Part-1(Afternoon)
25:03 -
Manufacturing Engineering-set2-Part-2(Afternoon)
42:05 -
Refrigeration and air conditioning-set2(Afternoon)
08:15 -
Strength of Material-set2(Afternoon)
21:42 -
Theory of Machine-set2(Afternoon)
43:39 -
Thermodynamics-set2(Afternoon)
29:09 -
Material Science-set2(Afternoon)
17:13
GATE Mechanical Engineering PYQ video Solutions – 2021
-
application-of-thermodynamics-2
07:52 -
applications-of-thermodynamics-2
11:10 -
engineering-mechanics
28:46 -
engineering-mechanics-set1
05:52 -
fluid machinary
06:52 -
fluid-machinary-1
41:14 -
fluid-machinery-set1
08:42 -
fluid-mechanics-2
31:47 -
fluid-mechanics-set1
05:52 -
heat-transfer-1
16:43 -
heat-transfer-set1
20:06 -
industrial-engineering-set1
19:41 -
industrial-engineering-set2
21:32 -
machine-design
09:27 -
machine-design-set1
20:55 -
manufacturing-engineering
33:28 -
manufacturing-engineering-1
30:49 -
manufacturing-engineering-2
19:25 -
material-science
04:55 -
refrigeneration-air-conditioning-1
15:26 -
refrigeneration-air-conditioning-2
15:18 -
refrigeneration-air-conditioning-part2-set1
10:20 -
strength-of-materials
22:13 -
strength-of-material-set1
25:13 -
theory-of-machine
31:17 -
theory-of-machine-2
57:25 -
thermodynamics-part1
31:47 -
thermodynamics-part1-set1
19:02 -
thermodynamics-part2-set1
04:22
GATE Mechanical Engineering PYQ video Solutions – 2022
-
application-of-thermodynamics-set1-part2
02:41 -
application-of-thermodynamics-set2
09:53 -
engineering-mechanics-part2-set1
10:49 -
engineering-mechanics-set1-part1
30:22 -
engineering-mechanics-set2
23:29 -
fluid-mechanics-set1 (1)
19:02 -
fluid-mechanics-set2
31:46 -
heat-transfer-part1-set2
30:56 -
heat-transfer-set1 (1)
52:35 -
industrial-engineering-set1 (1)
18:39 -
industrial-engineering-set2 (1)
27:32 -
machine-design-set1 (1)
14:49 -
manufacturing-engineering-part1-set1
46:10 -
manufacturing-engineering-set1-part2
04:57 -
manufacturing-engineering-set2
45:46 -
material-science-set1
14:55 -
material-science-set2
04:55 -
refrigeneration-air-conditioning-part2-set2
06:02 -
strength-of-material-set1 (1)
30:17 -
strength-of-material-set2
44:19 -
theory-of-machine-set1
33:54 -
theory-of-machine-set2
23:30 -
thermal-engineering-part1-set1
08:33 -
thermal-engineering-part2-set1
08:33 -
thermal-engineering-set2
15:45
GATE Mechanical Engineering PYQ video Solutions – 2023
-
engineering-mechanics (1)
23:59 -
fluid-mechanics
46:17 -
heat-transfer
19:40 -
industrial-engineering
08:36 -
machine-design-part1
17:19 -
machine-design-part2
28:48 -
manufacturing-engineering-part1
52:32 -
manufacturing-engineering-part2
27:21 -
material-science (1)
14:54 -
strength-of-material-part1
52:36 -
strength-of-material-part2
46:54 -
theory-of-machine (1)
24:20 -
thermodynamics-part1 (1)
26:06
GATE Mechanical Engineering PYQ video Solutions – 2024
-
application-of-thermodynamics-part2
44:03 -
engineering-mechanics
14:26 -
fluid-mechanics-power-plant
26:11 -
heat-transfer
16:47 -
industrial-engineering-part1
10:13 -
industrial-engineering-part2
26:02 -
industrial-engineering-part3
06:53 -
machine-design
25:17 -
manufacturing-engineering-part1
35:39 -
manufacturing-engineering-part2
07:06 -
material-science
14:54 -
strength-of-material
15:22 -
theory-of-machine
38:55 -
thermodynamics-part1
55:00
GATE Mechanical Engineering PYQ video Solutions – 2025
-
Heat Transfer
20:42 -
Material Science
21:33 -
Theory of machine
32:30 -
Application of thermodynamic
26:32 -
Engineering Mechanics
07:56 -
Fluid Mechanics
46:22 -
Industrial Engineering PART-1
30:40 -
Industrial Engineering PART-2
26:18 -
Machine Design
21:27 -
Manufacturing Engineering
46:25 -
Refrigeration and air conditioning
12:18 -
Strength of Material
30:28 -
Thermodynamics PART-1
20:28 -
Thermodynamics PART-2
06:02
Quiz
-
Mechanical Engineering Quiz
Student Ratings & Reviews
No Review Yet
