About Course
Production and Industrial engineering (PIE) is an interdisciplinary engineering discipline that includes manufacturing technology, engineering sciences, management science, and optimization of complex processes, systems, or organizations.
What I will learn?
- 400+ Hrs Live Recorded Lectures
- Course includes – Recorded Lecture Videos , E-book , Practice Set with PYQ , Chapter wise Mock Test and Full Length Mock Test
- Recorded by Best Mentors across the country from IIT/IISc
Course Curriculum
Module – GATE 21 ADDED SYLLAB
Chapter 1: Aptitude
-
56:41
E-Book – GATE – 21 ADDED SYLLABUS
-
E-Book
Practice Set – GATE – 21 ADDED SYLLABUS
-
Practice Set 1
-
Practice Set 2
Module – Theory of Machines
Chapter-1 Simple Mechanisms
-
1.0 Theory of Machines Introduction
20:50 -
36:22
-
39:01
-
24:08
-
24:24
-
23:08
-
42:42
-
1.7 Inversion of Single Slider Crank Mechanism
01:10:50 -
1.8 Inversion of Double Slider Crank Mechanism
22:59 -
27:13
-
1.10 Chapter-1 GATE Questions
17:01
Chapter-2 Velocity and Acceleration Analysis
Chapter-3 Gears and Gear Trains
-
57:26
-
50:09
-
48:33
-
31:35
-
11:06
-
58:30
-
46:04
-
21:30
Chapter-4 Analysis of Single Slider Crank Mechanism
Chapter-5 Flywheel
Chapter-6 Governors
Chapter-7 Balancing
-
49:29
-
22:01
-
58:16
-
01:09:08
-
24:18
-
16:56
Chapter-8 Mechanical Vibrations
-
48:00
-
01:22:27
-
01:02:42
-
01:28:44
-
48:39
-
32:13
-
39:08
Chapter-9 Cams and Followers
Chapter-10 Gyroscope
E-Book – Theory of Machines
-
E-Book
Practice Set – Theory of Machines
-
Practice Set 1
-
Practice Set 2
Mock Test – Theory of Machines
-
Mock Test 1
-
Mock Test 2
Module – Thermal Engineering
Chapter 1: Basics of Thermodynamics
-
1.1 Introduction of Thermodynamics
28:30 -
1.2 Thermodynamic System & Processes
59:27 -
1.3 Zeroth Law of Thermodynamics & Thermometric Principle
47:54 -
1.4 (a) Thermodynamic Work Transfer (b) Thermodynamic Work Transfer Examples
01:40:45 -
1.4 (B) Thermodynamic work transfer Examples
22:00 -
1.5 First Law of Thermodynamics
50:33 -
1.6 Heat Transfer in Various Processes
41:36 -
1.7 Steady & Unsteady Flow Energy Equation
01:41:13 -
1.8 GATE Questions (Practice Quiz also available)
01:01:57
Chapter 2: Second Law of Thermodynamics
-
2.1 Concept of 2nd Law of Thermodynamics
01:09:43 -
2.2 Thermodynamic Temperature Scale
47:42 -
2.3 Entropy & Clausius Inequality
45:41 -
2.4 Physical Meaning of Entropy and Entropy Changes of Gases, Liquid & Solid
01:24:12 -
2.5 GATE Questions on Second Law of Thermodynamics (Practice Quiz also available)
33:44
Chapter 3: Available Energy/Exergy/Availability
-
3.1 Concept of Available Energy (Exergy) & Change in Exergy due to Finite Temperature Difference
46:46 -
3.2 Exergy Associated with K.E & P.E, Exergy Change of a System (Closed & Open), and Concept of Irreversibility
33:20 -
3.3 Second Law Efficiency & Solved Examples on Exergy
50:55 -
3.4 GATE Questions on Exergy
30:51
Chapter 4: Thermodynamic Relation
-
4.1 Maxwell, Tds & Energy Equations
01:14:06 -
4.2 Joule-Thompson Coefficient, Clapeyron & Clausius-Clapeyron Equations
46:39 -
4.3 Solved Examples on Thermodynamic Relation
14:08 -
4.4 GATE Questions on Thermodynamic Relation
16:09
Chapter 5: Introduction of Heat Transfer
-
5.1 Introduction of Heat Transfer (Difference between Heat Transfer & Thermodynamics, Modes of Heat Transfer, Variation of Thermal Conductivity)
01:32:26 -
5.2 Introduction of Heat Transfer (Laws of Heat Transfer)
38:31
Chapter 6: Conduction
-
6.1 Conduction (Through a Slab, Electrical Analogy of Heat Transfer, Conductive Thermal Resistance, Through Composite Slab)
28:07 -
6.2 Conduction (Convection Thermal Resistance, Conduction-Convection Heat Transfer Through a Composite Slab, Overall Heat Transfer Coefficient, and Examples)
30:12 -
6.3 Conduction (Radial Conduction Heat Transfer Through a Hollow Cylinder & Composite Cylinder and an Example)
28:28 -
6.4 Conduction (Conduction-Convection Heat Transfer Through a Composite Cylinder and an Example)
37:36 -
6.5 Conduction (Generalized Conduction Equation and Thermal Diffusivity)
42:30 -
6.6 Conduction (Critical Radius of Insulation & Its Physical Significance, and Examples)
52:13 -
6.7 Conduction (Heat Generation in a Slab and an Example)
43:38 -
6.8 Conduction (Radial Conduction Heat Transfer Through a Hollow Sphere, Critical Radius of Insulation for Spherical Condition, and Variable Thermal Conductivity)
49:48 -
6.9 Conduction (Heat Generation in Cylinder or Wire and an Example Based on Internal Heat Generation)
52:49
Chapter 7: Radiation
-
7.1 Fundamentals of Thermal Radiation
36:28 -
7.2 Basic Definitions/Terminologies of Thermal Radiation
30:37 -
7.3 Laws of Thermal Radiation (Kirchhoff, Planck, Wien’s Displacement, Stefan-Boltzmann, Lambert Cosine)
01:13:32 -
7.4 Shape Factor (Concept of Shape Factor & Relations: Reciprocity, Summation, Superposition, Symmetry)
54:34 -
7.5 Radiation Network & Radiation Exchange
37:23 -
7.6 Radiation Shields & Radiation Effect in Temperature Measurement
25:28
Chapter 8: Convection
-
8.1 Introduction to Convection Heat Transfer
18:12 -
8.2 Basics of Forced Convection Heat Transfer
38:32 -
8.3 Thermal Boundary Layer Concept
44:22 -
8.4 External Forced Convection (Flow Over a Flat Plate)
35:25 -
8.5 Internal Forced Convection (Flow Through Pipe or Duct)
22:57 -
8.6 Natural or Free Convection-1
15:42
E-Book – Thermal Engineering
-
E-Book
Practice Set – Thermal Engineering
-
Practice Set 1
-
Practice Set 2
Mock Test – Thermal Engineering
-
Mock Test 1
-
Mock Test 2
Module – Industrial Engineering (Operations Research & Project Management)
Chapter 1: Basic of Industrial Engineering
-
1.1 Basic of Industrial Engineering
14:33 -
1.2 Break Even Analysis
41:16 -
1.3 GATE Questions
08:34
Chapter 2: Inventory Control
-
2.1 Basic Inventory Control
33:04 -
2.2 Deterministic Model Part 1
01:19:42 -
2.3 Deterministic Model Part 2
51:55 -
2.4 Probability & Inventory Management Technique
54:01 -
2.5 GATE Questions
15:06
Chapter 3: Fore Casting
-
3.1 Fore Casting
50:30 -
3.2 GATE Questions
12:12
Chapter 4: Queuing Theory
-
4.1 Queuing Theory
43:09 -
4.2 GATE Questions
07:10
Chapter 5: Sequencing
-
5.1 Sequencing
09:27 -
5.2 GATE Questions
09:27
Chapter 6: Project Management
-
6.1 Basic Introduction to Project Management
01:01:06 -
6.2 PEAR
57:33 -
6.3 Critical Path Method
53:07 -
6.4 GATE Questions
30:47
Chapter 7: Linear Programming
-
7.1 Graphical Methods
01:06:27 -
7.2 Simplex Method
47:59 -
7.3 Transportation
01:19:55 -
7.4 GATE Questions
28:47
E-Book – Industrial Engineering (Operations Research & Project Management)
-
E-Book
Practice Set – Industrial Engineering (Operations Research & Project Management)
-
Practice Set 1
-
Practice Set 2
Mock Test – Industrial Engineering(Operations Research & Project Management)
-
Mock Test 1
-
Mock Test 2
Module – Manufacturing Processes I and II
Chapter-1 Metal Casting
-
1.1 Basics of Metal Casting
26:25 -
1.2 Allowances in Casting
01:04:59 -
1.3 Types of Pattern and its materials
27:33 -
1.4 Mould Making & Properties of Sand
01:03:44 -
1.5 Core Making
25:42 -
1.6 Paddings & Chills
22:59 -
1.7 Pouring & Solidifications
36:51 -
1.8 Gating System
44:03 -
1.9 Aspiration Effect
21:04 -
1.10 Solidifications Type, Time and Felting & Inspections
42:04 -
1.11 Riser & Riser Design
01:02:37 -
1.12 Riser for plate & Disc shaped casting
16:14 -
1.13 Special Casting
53:57 -
1.14 Defects in Casting
19:20 -
1.15 Metal Casting GATE Questions
38:16
Chapter-2 Metal Forming
-
2.1 Introduction of Metal Forming
23:18 -
2.2 Strain Hardening
32:07 -
2.3 Yield Point Phenomenon & Hot Working
01:07:13 -
2.4 Flow stress & Flow curve Equations
57:30 -
2.5 Plastic Deformation & Yield Criteria
22:41 -
2.6 Rolling Process
01:04:56 -
2.7 Wire drawing
01:14:09 -
2.8 Tube Drawing & Extrusion Process
13:54 -
2.9 Forging Operations
01:04:00 -
2.10 Defects in Metal Forming
15:27 -
2.11 Metal Forming GATE Questions
28:52
Chapter-3 Sheet Metal Operations
-
3.1 Sheet Metal Operations
01:41:28 -
3.2 Deep Drawing
01:09:18 -
3.3 Bending & Minor Sheet Metal Operations
35:43 -
3.4 Special Metal Forming Processes
32:30 -
3.5 Sheet Metal Operations Gate Questions
33:45
Chapter-4 Metal Cutting
-
4.1 Introduction to Metal cutting
58:49 -
4.2 Influence of tool geometry on various parameters
39:27 -
4.3 Mechanics of Machining
36:01 -
4.4 Shear Angle, Velocities, Shear Strain & Rate of Shear Strain
37:48 -
4.5 Orthogonal and oblique Cutting
29:24 -
4.6 Force in the Metal Cutting Operation
42:59 -
4.7 Shear Stress, Work Done & Specific Cutting Energy
55:01 -
4.8 Heat Generations in Cutting
13:40 -
4.9 Tool Failure Criteria & Tool Life
41:44 -
4.10 Economics of Machining
19:55 -
4.11 Conversion of Oblique Cutting to Orthogonal Cutting
36:38 -
4.12 Tool Materials
30:05 -
4.13 Grinding Operations
32:20 -
4.14 Metal Cutting GATE Questions
57:02
Chapter-5 Non Traditional Machining
-
5.1 Non Traditional Machining-I (AJM,USM & ECM )Draft Lesson
01:05:51 -
5.2 Non Traditional Machining-II (EDM,EBM,LBM& USM )
32:02 -
5.3 Non Traditional Machining GATE Questions
26:23
Chapter-6 Computer Integrated Manufacturing System
-
6.1 Introduction to advanced Machining Methods
10:06 -
6.2 Computer Integrated Manufacturing-I
01:18:11 -
6.3 Computer Integrated Manufacturing-II
37:38 -
6.4 Computer Integrated Manufacturing GATE Questions
19:56
Chapter-7 Welding
-
7.1 Gas Welding
01:24:26 -
7.2 Arc and Thermit Welding
39:02 -
7.3 Resistance Welding
36:42 -
7.4 Soldering, Brazing & Braze Welding
22:48 -
7.5 Setting of Power Sources
01:02:54 -
7.6 Welding GATE Questions
40:12
Chapter-8 Metrology and Inspection
-
8.1 Introduction of Metrology and Linear Measurements
37:23 -
8.2 Limits, Fits and Tolerances Part-1
01:02:53 -
8.3 Limits, Fits and Tolerances Part-2
52:09 -
8.4 Comparators
01:02:09 -
8.5 Form and Finish Measurement
57:12 -
8.6 Limit Gauges Part-1
39:44 -
8.7 Limit Gauges Part-2
34:30 -
8.8 Angular MeasurementsDraft Lesson
46:10 -
8.9 Machine Tool Metrology (Alignment & Testing Methods)
52:42 -
8.10 Metrology and Inspection GATE Questions
18:21
E-Book – Manufacturing Processes I and II
-
E-Book
Practice Set – Manufacturing Processes I and II
-
Practice Set 1
-
Practice Set 2
Mock Test – Manufacturing Processes I and II
-
Mock Test 1
-
Mock Test 2
Module – Engineering Mathematics
Chapter-1: Limit
-
1.1 limit-part-1
01:22:14 -
1.2-limit-part-2
01:09:01 -
1.3 -limit-gate-questions
26:48
Chapter 2: Continuity
-
2.1 Introduction to Continuity
01:11:59 -
2.2 Types of Continuity
16:40
Chapter 3: Differentiabilty
-
3.1 Introduction to Differentiability
35:43 -
3.2 Differentiability of modulus function
28:24 -
3.3 Various exam questions
16:40
Chapter 4: Properties of function
-
4.1 Monotone function
30:27 -
4.2 Increasing and decreasing function
54:12 -
4.3 Concave upward and downward
42:36 -
4.4 Point of inflection
02:10:21
Chapter 5: Maxima & Minima
-
5.1 Local Maxima & Local Minima
23:52 -
5.2 Absolute maximum and absolute minimum
12:58 -
5.3 Maximum & minimum value of a function in the given interval
31:50
Chapter 6: Min value theorem
-
6.1 Intermediate MVT
28:00 -
6.2 Integral form of intermediate MVT
17:26 -
6.3 Rolle’s MVT
28:00 -
6.5 Integral form of Lagrange’s MVT
17:26
Chapter 7: Integration
-
7.1 Integration
57:39 -
7.2 Arc length
01:19:26
Chapter 8: Linear algebra
-
8.1 Linear Transformation
01:52:51 -
8.2 Introduction to matrices
58:27 -
8.3 Rank & Nullity
24:32 -
8.4 System of Linear equations
01:12:43 -
8.5 Eigenvalues & Eigenvectors
41:57 -
8.6 Number of linearly independent Eigenvectors
01:16:46 -
8.7 Diagonalization of matrix
48:21 -
8.8 Some important properties of special matrices
42:25
Chapter 9: Probability distribution
-
9.1 Discrete probability distribution
01:58:46 -
9.2 Binomial distribution
01:04:32
Chapter 10: Statistics
-
10.1 Statistics
05:46 -
10.2 Statistics Gate Questions
05:46
Chapter 11: Differential equation
-
11.1 differential-equation-part-1
01:53:39 -
11.2 differential-equation-part-2
01:01:04 -
11.3 differential-equation-part-3
17:02 -
11.4 differential-equation-part-4
01:13:03 -
11.5 partial-differential-equations-gate-questions
26:48
Chapter 12: Numerical methods
-
12.1 Numerical Integration
01:47:40 -
12.2 Numerical Differentiation
01:11:01 -
12.3 Roots of Equations
02:15:45 -
12.4 numerical-analysis-maths
01:13:16
Chapter 13: Complex analysis
-
13.1 complex-analysis-part-1
01:11:27 -
13.2 complex-analysis-part-2
01:20:05 -
13.3 complex-analysis-part-3
53:37 -
13.4 -complex-analysis-gate-questions
01:13:24 -
13.5 Complex Analysis
30:09 -
13.6 power-series-engineering
22:07
Chapter 14: Vector analysis
-
14.1 Vector Analysis PART-1
01:06:58 -
14.2 Vector Analysis PART-2
54:12 -
14.3 Vector Analysis PART-3
42:36 -
14.4 Vector Analysis PART-4
02:10:21 -
14.5 Vector Analysis GATE Questions PART-1
27:15 -
14.6 14.5 Vector Analysis GATE Questions PART-2
25:00
Chapter 15: Laplace transform
-
15.1 Laplace Transform
02:23:11 -
15.2 Laplace Transform GATE Questions
06:52
E-Book – Engineering Mathematics
-
E-Book
Practice Set – Engineering Mathematics
-
Practice Set 1
-
Practice Set 2
Mock Test – Engineering Mathematics
-
Mock Test 1
-
Mock Test 2
Module – Verbal Ability
Chapter-1: Noun
-
1.1 Noun
01:08:39
Chapter-2: Pronoun
-
2.1 Pronoun
01:44:52
Chapter-3: Subject And Verb Agreement
-
3.1 Subject-And-Verb-Agreement
01:17:39
Chapter-4: Tenses
-
4.1 Tenses
55:33
Chapter-5: Modifiers
-
5.1 Modifiers -1
01:05:44 -
5.2 Modifiers -2
01:05:44
Chapter-6: Vocabulary Building
-
6.1 21-introduction-to-vocabulary
01:08:20 -
6.2 facts-inferences-judgements
45:40
Chapter-7: Verbal Logic
-
7.1 Course of Action
37:19 -
7.2 Critical Reasoning
42:46 -
7.3 Summary Type Questions
44:09 -
7.4 Deductive Logic & Logical Consistency
01:16:06
Chapter-8: Reading Comprehension (RC)
-
8.1 Introduction to Reading Comprehension
27:24 -
8.2 Reading Comprehension – Tones
50:46 -
8.3 Reading Comprehension – How to Solve Questions
01:06:16
Chapter-9: Articles & Prepositions
-
9.1 Articles & Prepositions
01:20:05
E-Book – Verbal Ability
-
E-Book
Practice Set – Verbal Ability
-
Practice Set 1
-
Practice Set 2
Mock Test – Verbal Ability
-
Mock Test 1
-
Mock Test 2
Module – Logical Reasoning
Chapter 1: Series
-
1.1 Series
25:12
Chapter 2: Coding and Decoding
-
2.1 Coding and Decoding
13:29
Chapter 3: Analytical Reasoning (AR) or Data Arrangement
-
3.1 Analytical Reasoning (AR) or Data Arrangement
39:34
Chapter 4: Blood Relations
-
4.1 Blood Relations
11:59
Chapter 5: Calendars
-
5.1 Calendars
23:53
Chapter 6: Data Interpretation
-
6.1 Clock
20:30 -
6.2 Data Interpretation
26:04
Chapter 7: Directions
-
7.1 Directions
11:09
Chapter 8: Syllogism
-
8.1 Syllogism
16:33
E-Book – Logical Reasoning
-
E-Book
Practice Set – Logical Reasoning
-
Practice Set 1
-
Practice Set 2
Mock Test – Logical Reasoning
-
Mock Test 1
-
Mock Test 2
Module – Quantitative Aptitude
Chapter 1: Numbers System
-
1.1 Types of Numbers
53:51 -
1.2 Divisibility Rules
21:33 -
1.3 Cyclicity or Fundamental to Find Last Digit
16:15 -
1.4 Concept of HCF/LCM and its Application
22:36 -
1.5 Remainders
12:51 -
1.6 Highest Power and Trailing Zeros
22:33 -
1.7 Factors
23:54 -
1.8 Number System Exam Questions
25:31 -
1.9 Cyclicity – Last Digit (Unit Place)
42:53 -
1.10 Cyclicity – Last 2 Digits
36:42 -
1.11 Remainder Theorem
01:10:10 -
1.12 Base System
35:05 -
1.13 Right Most Non-zero Digit
15:24
Chapter 2: Percentages and Application
-
2.1 Introduction to Percentage
15:06 -
2.2 Change of Base
16:01 -
2.3 Profit Loss and Discount Concept
33:59 -
2.4 Simple Interest and Compound Interest
16:08 -
2.5 Faulty Weights
03:10 -
2.6 Successive Percentage Change
05:25 -
2.7 Percentage Exam Questions
20:08
Chapter 3: Ratio, Proportion, and Mixtures
-
3.1 Introduction to Ratio
17:53 -
3.2 Introduction to Proportion
08:36 -
3.3 Partnership
23:10 -
3.4 Alligation & Mixture
13:12 -
3.5 Ratio & Proportion Exam Questions
13:12
Chapter 4: Time Speed and Distance
-
4.1 Relation Between Time, Speed & Distance
07:41 -
4.2 Average Speed
10:54 -
4.3 Relative Speed
21:48 -
4.4 Boats & Stream
10:43 -
4.5 Races
11:02 -
4.6 Time, Speed & Distance Exam Questions
31:07
Chapter 5: Time and Work
-
5.1 Introduction to Time & Work
02:37 -
5.2 Different Types of Questions of Time & Work
33:49 -
5.3 Time & Work Exam Questions
33:49
Chapter 6: Geometry
-
6.1 Angles
16:53 -
6.2 Triangles & Properties
19:00 -
6.3 Quadrilateral
05:15 -
6.4 Circle
11:29 -
6.5 Polygon
07:18 -
6.6 Trigonometry
17:46 -
6.7 Geometry & Mensuration (Higher Concept)
52:04 -
6.8 Mensuration
37:10 -
6.9 Geometry Exam Questions
01:01:36
Chapter 7: Permutation and Combination
-
7.1 Arrangement Based on Alphabets
12:02 -
7.2 Arrangement Based on Numbers
11:58 -
7.3 Rank in Dictionary
06:44 -
7.4 Combination
11:57 -
7.5 Application of Combination
32:39 -
7.6 Permutation
08:24 -
7.7 Permutation & Combination Exam Questions
25:59
Chapter 8: Probability and Set Theory
-
8.1 Introduction to Probability
07:13 -
8.2 Types of Questions of Probability
46:33 -
8.3 Probability Exam Questions
27:57
Chapter 9: Algebra
-
9.1 Linear Equation
17:57 -
9.2 Quadratic Equation
19:03 -
9.3 Introduction to Progression
37:51 -
9.4 Logarithm
46:35 -
9.5 Logarithm Practice
49:03 -
9.6 Modulus
54:15 -
9.7 Inequality
23:39 -
9.8 Algebra Exam Questions
28:53
Chapter 10: Set Theory
-
10.1 Set Theory
11:28
Chapter 11: Previous Year Aptitude GATE Questions
-
11.1 1 aptitude-me-gate-question-2020
16:15 -
11.2 2 aptitude-ee-gate-question-2020
11:14 -
11.3 3 aptitude-ec-gate-question-2020
10:52 -
11.4 4 aptitude-cs-gate-question-2020
09:12 -
11.5 5 aptitude-ch-gate-question-2020
12:06 -
11.6 6 aptitude-ce-gate-question-2020
20:05 -
11.7 7aptitude-gate-questions-2018-ce
15:36 -
11.8 8 aptitude-gate-questions-2018-cs
08:11 -
11.9 9aptitude-gate-questions-2018-ec
08:52 -
11.10 10 aptitude-gate-questions-2018-me
12:37 -
11.11 11 aptitude-gate-questions-2017-ch
10:37 -
11.12 12 aptitude-gate-questions-gate-2016-ec
12:32 -
11.13 13 aptitude-gate-questions-gate-2016-ee
10:32 -
11.14 14 aptitude-gate-questions-2015
28:36 -
11.15 15 aptitude-gate-questions-2015-cs
12:15 -
11.16 16 aptitude-gate-questions-2015-ec-in
07:30 -
11.17 17 aptitude-gate-questions-2015-me
15:10
E-Book – Quantitative Aptitude
-
E-Book
Practice Set – Quantitative Aptitude
-
Practice Set 1
-
Practice Set 2
Mock Test – Quantitative Aptitude
-
Mock Test 1
-
Mock Test 2
Module – Applied Mechanics PART-1
Chapter 1: Force Systems
-
1.1. Force and its classification
23:06 -
1.2. Principle of Transmissibility – Force as a sliding vector
17:20 -
1.3. Concurrent Force System
01:03:23 -
1.4. Force And Couple System
01:19:06 -
1.5. Tips to Draw Free Body Diagram
47:16 -
1.6. Standard Problems Force And Couple System
37:46
Chapter 2: Structure Analysis
-
2.1. Structure analysis
31:30 -
2.2. Analysis of Plane Trusses
01:04:26 -
2.3. Standard Problems of Plane Trusses
27:10 -
2.4. Chapter-1 and 2 GATE Questions
50:51
E-Book – Applied Mechanics PART-1 (Engg. Mechanics)
-
E-Book
Practice Set – Applied Mechanics PART-1 (Engg. Mechanics)
-
Practice Set 1
-
Practice Set 2
Mock Test – Applied Mechanics PART-1
-
Mock Test 1
-
Mock Test 2
Module – Fluid Mechanics
Chapter 1: Introduction & Fluid Properties
-
1.1 introduction-basics-of-fluid-mechanics
34:10 -
1.2 fluid-properties-PART – 1
43:57 -
1.3 fluid-properties-PART – 2
41:35 -
1.4 fluid-properties PART – 3
01:12:59 -
1.5 fluid-properties-PART – 4
01:03:16 -
1.6 16-GATE Problems – Fluid Mechanics
20:19
Chapter 2: Fluid Statics
-
2.1 41fundamental-equation-of-fluid-statics
50:37 -
2.2 pressure-and-its-measurement
38:30 -
2.2 some-standard-problems-on-manometers
39:43 -
2.4 44-forces-on-submerged-bodies
41:44 -
2.5 45-forces-on-submerged-bodies
01:00:42 -
2.6 46-buoyancy
01:08:08 -
2.7 47-stability-of-unconstrained-bodies-in-fluid
45:47 -
2.8 48-fluid-under-rigid-body-motion-relative-equilibrium
01:06:46 -
2.9 49-gate-problems-1-to-4
20:40 -
2.10 410-gate-problems-5-6-7
27:27 -
2.11 411-gate-problems-8-9-10
18:11 -
2.12 412-gate-problems-11-12-13
36:43 -
2.13 413-gate-problems-14 15 16 17
32:19
Chapter 3: Fluid Kinematics
-
3.1 FUNDAMENTALS
01:41:40 -
3.2 FLUID TRANSLATION, ROTATION AND DEFORMATION – I
01:02:08 -
3.3 FLUID TRANSLATION, ROTATION AND DEFORMATION – II
01:19:55 -
3.4 STREAM FUNCTION AND VELOCITY POTENTIAL
01:06:13 -
3.5 SOME STANDARD PROBLEMS ON FLUID KINEMATICS
49:31 -
3.6 GATE PROBLEMS
21:21 -
3.7 GATE PROBLEMS
18:07 -
3.8 GATE PROBLEMS
37:32
Chapter 4: Integral form of Conservation Equations
-
4.1 FUNDAMENTALS OF REYNOLDS TRANSPORT THEOREM
28:38 -
4.2 APPLICATION OF RTT TO CONSERVATION OF MASS
43:15 -
4.3 APPLICATION OF RTT TO CONSERVATION OF LINEARE MOMENTUM OR MOMENTUM THEOREM
51:02 -
4.4 APPLICATION OF RTT TO CONSERVATION OF ANGULAR MOMENTUM
50:15
Chapter 5: Dynamics of Inviscid Flows – Fundamentals & Application
-
5.1 PHYSICS OF EULER’S EQUATION – I
40:28 -
5.2 PHYSICS OF EULER’S EQUATION – II
40:22 -
5.3 APPLICATION OF BERNOULLI’S EQUATION – I
01:20:34 -
5.4 APPLICATION OF BERNOULLI’S EQUATION – II
37:31 -
5.5 VORTEX FLOWS
37:31 -
5.6 GATE PROBLEMS – I
29:05 -
5.7 GATE PROBLEMS – II
20:50 -
5.8 GATE PROBLEMS – III
20:50
Chapter 6: Dynamics of Viscous Incompressible Flow
-
6.1 SOME EXACT SOLUTION OF NAVIER STOKES EQUATION – I
01:41:53 -
6.2 SOME EXACT SOLUTION OF NAVIER STOKES EQUATION – II
36:26 -
6.3 SOME EXACT SOLUTION OF NAVIER STOKES EQUATION – III
01:29:29 -
6.4 VISCOUS FLOW THROUGH PIPES
01:06:15 -
6.5 GATE PROBLEMS
35:23
Chapter 7: Boundary Layer Theory
-
7.1 BOUNDARY LAYER THEORY – I
01:12:17 -
7.1.1_Introductory Concepts
01:12:30 -
7.2 BOUNDARY LAYER THEORY – II
01:12:30 -
7.3 BOUNDARY LAYER THEORY – III
01:20:36 -
7.4 GATE PROBLEMS OF BOUNDARY LAYER THEORY
36:29
Chapter 8: Principle of Similarity and Dimensional Analysis
-
8.1 DIMENSIONAL ANALYSIS & PRINCIPLE OF SIMILARITIES – I
49:23 -
8.2 DIMENSIONAL ANALYSIS & PRINCIPLE OF SIMILARITIES – II
01:00:09
Chapter 9: Turbulent Flow
-
9.1_Introduction
01:05:26
Chapter 10: Fluid Machines
-
FLUID MACHINES – I
01:20:17 -
10.2 FLUID MACHINES – II
01:17:31 -
10.3 FLUID MACHINES – III
01:08:25 -
10.5 FLUID MACHINES – V
47:14 -
10.6 FLUID MACHINES – VI
01:02:43 -
10.7 GATE PROBLEMS
53:52
Chapter 11: Basics of Compressible
-
11.1 Basics of Compressible
02:30:59
E-Book – Fluid Mechanics
-
E-Book
Practice Set – Fluid Mechanics
-
Practice Set 1
-
Practice Set 2
Mock Test – Fluid Mechanics
-
Mock Test 1
-
Mock Test 2
Module – Applied Mechanics part -2
Chapter 1: Introduction of Strength of Materials (SOM)
-
Introduction of Strength of Materials (SOM)
01:32:52
Chapter 2: Load & Its Effect
-
2.1 Load & Its Effect Part 1
01:05:36 -
2.2 Load & Its Effect Part 2
01:54:54 -
2.3 Load & Its Effect Part 3
01:20:02 -
2.4 Load & Its Effect Part 4
01:01:18 -
2.5 Load & Its Effect Part 5
55:48 -
2.6 Load & Its Effect GATE Questions
30:08
Chapter 3: Basic Concept of SOM
-
3.1 Basic Concept of SOM Part 1
01:11:50 -
3.2 Basic Concept of SOM Part 2
01:11:14 -
3.3 Basic Concept of SOM Part 3
55:58 -
3.4 Basic Concept of SOM Part 4
01:06:43 -
3.5 Basic Concept of SOM GATE Questions
17:10
Chapter 4: Axial Stress
-
4.1 Axial Stress (Bars in Series)
58:57 -
4.2 Axial Stress (Elongation of Different Sections)
01:15:49 -
4.3 Axial Stress (Bars in Parallel)
32:38 -
4.4 Axial Stress (Thermal Stress)
01:09:04 -
4.5 Axial Stress and Thermal Stress GATE Questions
43:08
Chapter 5: Bending Stress
-
5.1 Bending Equation
01:19:12 -
5.2 Examples Based on Bending Equation
57:11 -
5.3 Beam of Uniform Strength & Bending of Wire
36:43 -
5.4 Bending Stress GATE Questions
13:38
Chapter 6: Direct Shear Stress
-
6.1 Direct Shear Stress & Its Distribution
01:07:52 -
6.2 Examples on Direct Shear Stress
46:19 -
6.3 Shear Center
28:10 -
6.4 Direct Shear Stress GATE Questions
13:57
Chapter 7: Pure Torsion
-
7.1 Torsion Equation
01:30:23 -
7.2 Examples on Pure Torsion
34:28 -
7.3 Pure Torsion (Bars in Series & Parallel)
01:22:37 -
7.4 Pure Torsion GATE Questions
38:34
Chapter 8: Combined Stress and Strain
-
8.1 Combined Stress and Strain Part 1
01:24:41 -
8.2 Combined Stress and Strain Part 2
01:08:12 -
8.3 Examples Based on Combined Stress and Strain
01:00:59 -
8.4 Theory of Failure
49:34 -
8.5 Mohr’s Circle
01:11:45 -
8.6 Combined Stress and Strain GATE Questions
32:43
Chapter 9: Column & Pressure Vessel
-
9.1 Cylindrical & Spherical
01:22:11 -
9.2 Column & Struts
01:25:25 -
9.3 Pressure Vessel & Column GATE Questions
27:02
Chapter 10: SFD and BMD
-
10.1 Beam Load & Support
01:05:01 -
10.2 Examples on Reaction Calculation
01:00:52 -
10.3 Shear Force & Bending Moment
01:39:57 -
10.4 Examples on Shear Force & Bending Moment
59:25 -
10.5 SFD & BMD GATE Questions
45:50
Chapter 11: Slope & Deflection
-
11.1 Slope & Deflection Part 1
01:35:10 -
11.2 Examples on Slope & Deflection Part 2
01:08:42 -
11.3 Slope & Deflection Part 3
47:56 -
11.4 Slope & Deflection GATE Questions
01:01:15
E-Book – Applied Mechanics PART-2 (Strength of Materials )
-
E-Book
Practice Set – Applied Mechanics PART-2 (Strength of Materials )
-
Practice Set 1
-
Practice Set 2
Mock Test – Applied Mechanics part -2
-
Mock Test 1
-
Mock Test 2
Quiz
-
Production and Industrial Engineering
Student Ratings & Reviews
No Review Yet
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹118.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹118.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹118.00 for 1 month
0 Lessons
From: ₹118.00 for 1 month
