12.17 Aptitude GATE Questions 2015 - Gateflix

Course Content

Module – Quantative Aptitude

Chapter 1 – Number

0/13

1.1 Types of numbers

1.2 Divisibility rules

1.4 Concept of HCF/LCM and its application

1.6 Highest power and trailing zeros

1.8 Previous Years Questions for practice

1.9 Cyclicity – Last Digit (Unit Place)

1.10 Cyclicity – Last 2 Digits

1.11 Remainder Theorem

1.12 Base System

1.13 Right Most Non-zero Digit

Chapter 2 – Percentages and Application

0/7

2.1 Introduction to Percentage

2.2 Change of base

2.3 Profit loss and discount concept

2.4 Simple interest and Compound interest

2.5 Faulty Weights

2.6 Successive Percentage Change

2.7 Percentage Exam Questions

Chapter 3 – Ratio, Proportion and Mixtures

0/5

3.1 Introduction to Ratio

3.2 Introduction to Proportion

3.3 Partnership

3.4 Alligation & Mixture

3.5 Ratio & Proportion Exam Questions

Chapter 4 – Time-Speed-Distance

0/6

4.1 Relation between Time, Speed & Distance

4.2 Average Speed

4.3 Relative Speed

4.4 Boats & Stream

4.6 Time, Speed & Distance Exam Questions

Chapter 5 – Time And Work

0/3

5.1 Introduction to Time & Work

5.2 Different types of questions of Time & Work

5.3 Time & Work Exam Questions

Chapter 6 – Geometry

0/9

6.2 Triangles & Properties

6.3 Quadrilateral

6.6 Trigonometry

6.7 Geometry & Mensuration (Higher Concept)

6.8 Mensuration

6.9 Geometry Exam Questions

Chapter 7 – Permutation And Combination

0/7

7.1 Arrangement based on Alphabets

7.2 Arrangement based on Numbers

7.3 Rank in Dictionary

7.4 Combination

7.5 Application of Combination

7.6 Permutation

7.7 Permutation & Combination Exam Questions

Chapter- 8 Probability

0/3

8.1 Introduction to Probability

8.2 Types of Questions of Probability

8.3 Probability Exam Questions

Chapter- 9 Algebra

0/8

9.1 Linear Equation

9.2 Quadratic Equation

9.3 Introduction to Progression

9.5 Logarithm-Practice

9.8 Algebra Exam Questions

Chapter – 10 Set Theory

0/1

10.1 Set Theory QnA

Chapter – 11 Spatial Aptitude

0/1

11.1 Spatial Aptitude

Chapter – 12 Previous Year Aptitude GATE Questions

0/17

12.1 Aptitude GATE Questions 2018 ME

12.2 Aptitude CE GATE Question 2020

12.3 Aptitude GATE Questions 2015 ME

12.4 Aptitude EE GATE Question 2020

12.5 Aptitude GATE Questions GATE 2016 EC

12.6 Aptitude ME GATE Question 2020

12.7 Aptitude GATE Questions 2015 CS

12.8 Aptitude CS GATE Question 2020

12.9 Aptitude GATE Questions 2018 EC

12.10 Aptitude CH GATE Question 2020

12.11 Aptitude GATE Questions 2015 EC+ IN

12.12 Aptitude EC GATE Question 2020

12.13 Aptitude GATE Questions GATE 2016 EE

12.14 Aptitude GATE Questions 2018 CE

12.15 Aptitude GATE Questions 2017 CH

12.16 Aptitude GATE Questions 2018 CS

12.17 Aptitude GATE Questions 2015

E-Book – Quantitative Aptitude

0/1

Practice Set – Quantative Aptitude

0/2

Mock Test – Quantative Aptitude

0/2

Module – Engineering Mathematics

Chapter 1: Limit

0/8

1.1 Introduction to Limit

1.2 Indeterminate forms

1.3 LImit Chapter GATE Questions

1.9 Approximation Method

1.10 Limit involving modulus function

1.11 Limit involving Riemann integration

1.12 Limit involving greatest integer function

1.13 Various exam questions and practice questions

Chapter 2: Continuity

0/3

2.1 Introduction to Continuity

2.2 Introduction to Continuity – GATE Questions

2.3 Types of Discontinuity

Chapter 3: Differentiability

0/3

3.1 Introduction to Differentiability Part – I

3.2 Differentiability of modulus function Part – II

3.3Introduction to Differentiability GATE Questions

Chapter 4: Properties of Functions

0/1

4.1 Properties of Functions

Chapter 5: Maxima & Minima

0/6

5.1 Introduction to Maxima & Minima

5.2 Maxima and Minima GATE Questions

5.3 Maxima & Minima (Two Variable)

5.4 Maxima And Minima Gate Questions – Math – Part-I

5.5 Maxima And Minima Gate Questions – Math – Part-II

5.6 Maxima And Minima Gate Questions – Math – Part-III

Chapter 6: Mean Value Theorem

0/2

6.1 Introduction to Mean-Value Theorem

6.2 Mean-Value Theorem GATE Questions

Chapter 7: Integration

0/2

7.1 Integration

7.2 Integration – Arc, Area , Length and Volume

Chapter 8: Linear Algebra

0/8

8.1 Linear Transformation

8.2 Introduction to matrices

8.3 Rank & Nullity

8.4 System of linear equations

8.5 Eigenvalues & Eigenvectors

8.6 Number of linearly independent Eigenvectors

8.7 Diagonalization of matrix

8.8 Some important properties of special matrices

Chapter 9: Probability Distribution

0/2

9.1 Probability Distribution

9.2 Poisson’s Distribution

Chapter 10: Statistics

0/2

10.1 Statistics

10.2 Statistics Gate Questions (MATHs)

Chapter 11: Differential Equation

0/5

11.1 Differential Equation Part – I

11.2 Differential Equation Part – II

11.3 Differential Equations – GATE Questions

11.4 Partial Differential Equations

11.15 Differential Equations GATE Questions

Chapter 12: Numerical Methods

0/3

12.1 Numerical Integration

12.2 Numerical Differentiation

12.3 Roots of Equations

Chapter 13: Complex Analysis

0/6

13.1 Complex Analysis PART – I

13.2 Complex Analysis PART – II

13.3 Complex Analysis PART – III

13.4 Complex Analysis – GATE Questions

13.5 Complex Differentiation

13.6 Zeros & Singularity: Poles, Essential Singularity, Harmonic Singularity

Chapter 14: Vector Analysis

0/6

14.1 Basics of Vector

14.2 Vector Differentiation – Gradient, Directional Derivative, Normal, Divergence, Curl

14.3 Vector Integration – Open path line integration, Closed path line integration, Surface integration, Stokes Theorem, Green’s Theorem, Gauss’s Divergence Theorem

14.4 Vector Analysis – PART -4

14.5 GATE questions

14.6 GATE questions 2

Chapter 15: Laplace Transform

0/2

15.1 Laplace Transform

Laplace Transform – GATE Questions

E-Book – Engineering Mathematics

0/1

Practice Set – Engineering Mathematics

0/2

Mock Test – Engineering Mathematics

0/2

ThermoDyanamics

Chapter 1: Basics of Thermodynamics

0/9

1.1 Introduction(Evolution) of Thermodynamics (THERMO)

1.2 Thermodynamic System And Processes (THERMO)

1.3 Zeroth Law Of Thermodynamics & Thermometric Principle (THERMO)

1.4.(a) Thermodynamic Work Transfer (THERMO)

1.4.(b) Thermodynamic Work Transfer Question (THERMO)

1.5 Heat & First law of Thermodynamics (THERMO)

1.6 Heat Transfer for Various Processes (THERMO)

1.7 Steady Flow Energy And Work Flow (THERMO)

1.8 GATE Questions (THERMO)

Chapter 2: Second law of Thermodynamics

0/5

2.1 Second Law Of Thermodynamics (THERMO)

2.2 Thermodynamic Temperature Scale (THERMO)

2.3 Entropy & Clausius Inequality (THERMO)

2.4 Physical Meaning Of Entropy (THERMO)

2.5 Gate Questions (THERMO)

Chapter 3: Available Energy/Exergy/Availability

0/10

3.1 31-concept-of-available-energy-exergy-change-in-exergy-due-to-finite-temperature-difference-thermo

3.2 32-exergy-associated-with-ke-pe-exergy-change-of-a-system-closed-open-and-concept-of-irreversibility-thermo

3.3 33-second-law-efficiency-solved-examples-on-exergy-thermo

3.4 34-gate-questions-thermo

3.5 35-heat-transfer-through-rod-connected-two-heat-source-at-different-temperature-ht

3.6 36-infinite-long-fin-approximation-ht

3.7 37-fins-efficiency-and-effectiveness-ht

3.8 38-unsteady-state-transient-heat-conduction-ht

3.9 39-examples-based-on-unsteady-state-heat-conduction-ht

3.10 310-fins-and-unsteady-gate-questions-ht

Chapter 4: Thermodynamic Relation

0/6

4.1 Thermodynamic Relation

4.2 Joule-Thompson Coefficient , Clapeyron and Clausius-clapeyron equation

4.3 Solved Examples on Thermodynamic Relation

4.4 Gate Questions on Thermodynamic Relation

4.5 Thermodynamic Properties Of Fluid I

4.6 Thermodynamic Properties Of Fluid II

Chapter 5: Pure Substances

0/5

5.1 Concept of Pure substance & Table and Charts like P-V , T-S & P-T Plot

5.2 Properties of Pure Substance and its Calculation , H-S Plot

5.3 Behavior of Ideal & Real gases and Reduced temperature & Pressure Concept.

5.4 Examples on Properties of Pure Substance

5.5 Gate Question on Properties of Pure Substance.

Chapter 6: Steam Turbine

0/1

Chapter 7: Gate Questions (Thermodynamics)

0/5

Gate questions -1

Gate questions -2

Gate questions -3

Gate questions -4

Gate questions -5

E-Book – Thermodynamics

0/1

Practice Set – Thermodynamics

0/2

Mock Test – Thermodynamics

0/2

Engg. Mechanics

Chapter 1: Force Systems

0/6

1.1. Force and its classification

1.2. Principle of Transmissibility – Force as a sliding vector

1.3. Concurrent Force System

1.4. Force And Couple System

1.5. Tips to Draw Free Body Diagram

1.6. Standard Problems Force And Couple System

Chapter 2: Structure Analysis

0/4

2.1. Structure analysis

2.2. Analysis of Plane Trusses

2.3. Standard Problems of Plane Trusses

2.4. Chapter-1 and 2 GATE Questions

Chapter 3: Distributed forces

0/2

3.1. Distributed forces-I

3.2. Distributed forces-II

Chapter 4: Dynamics of Particles

0/13

4.1. Newton law of motion –II

4.3. Standard Problems on Friction

4.4. Chapter-4 GATE Questions on Friction

4.5. Kinematics of particles

4.6. Chapter-4 Gate Questions On Kinematics Of Particle

4.7. Circular Motion And Projectile Motion

4.8. Centre Of Mass

4.9. Linear Momentum of a Particle & System of Particles

4.10. Work And Energy

4.11. Collision Theory

4.12. Standard Problems Based On Momentum And Energy Conservation

4.13. GATE Questions on Momentum Conservation, Collision and Energy

Chapter 5: Dynamics of Rigid Bodies

0/5

5.1. Dynamics of Rigid Bodies – I

5.2. Dynamics of Rigid Bodies – II

5.3. Dynamics of Rigid Bodies – III

5.4. Dynamics of Rigid Bodies – IV

5.5 GATE Questions on kinematics and Dynamics of Rigid Bodies

Chapter 6: Belt Pulley& Wedges

0/2

6.1 Belt Pulley& Wedges

6.2 Belt Pulley& Wedges

Chapter 7: Application of Wedges-Power Screw & Rolling Fiction

0/2

7.1 Application of Wedges-Power Screw & Rolling Fiction

7.2 Application of Wedges-Power Screw & Rolling Fiction

Chapter 8: Langrange’s Equation

0/2

8.1 Langrange’s Equation

8.2 Language’s Equation 2

Chapter 9: GATE QUESTIONS

0/4

9.1 Gate questions -1

9.2 Gate questions -2

9.3 Gate questions -3

9.4 Gate questions -4

E-Book – Engineering Mechanics

0/1

Practice Set – Engineering Mechanics

0/2

Mock Test – Engineering Mechanics

0/2

Module – Fluid Mechanics

Chapter 1: Preview of Fluid Mechanics

0/1

1.1 Preview of Fluid Mechanics

Chapter 2: Review of Mechanics

0/4

2.1 Review of Mechanics -I

2.2 Review of Mechanics -II

2.3 Review of Mechanics -III

2.4 Review of Mechanics -IV

Chapter 3: Introduction & Fluid Properties

0/6

3.1 States of Matter / Distinction between Solid & Fluid

3.12 Standard Problems

Fluid Properties 1

Fluid properties 2

Fluid Properties 3

Fluid Properties 4

Chapter 4: Fluid Statics

0/13

4.1 FUNDAMENTAL EQUATION OF FLUID STATICS

4.2 PRESSURE & ITS MEASUREMENT

4.3 SOME STANDARD PROBLEMS ON MANOMETERS

4.4 FORCES ON SUBMERGED BODIES – I

4.5 FORCES ON SUBMERGED BODIES – II

4.7 STABILITY OF UNCONSTRAINED BODIES IN FLUID

4.8 FLUID UNDER RIGID BODY MOTION / RELATIVE EQUILIBRIUM

4.9 GATE Problems I

4.10 GATE Problems II

4.11 GATE Problems III

4.12 GATE Problems IV

4.13 GATE Problems V

Chapter 5: Fluid Kinematics

0/8

5.1 fundamentals-fm

5.2 fluid-translation-rotation-deformation-i-fm

5.3 fluid-translation-rotation-and-deformation-ii-fm

5.4 stream-function-velocity-potential-fm

5.5 some-standard-problems-of-fluid-kinematics-fm

5.6 gate-problems-1-to-7-fm

5.7 gate-problems-8-to-11-fm

5.8 gate-problems-12-to-19-fm

Chapter 6: Integral form of Conservation Equations

0/4

6.1 Need for Reynolds Transport Theorem (RTT)

6.2 Intensive and Extensive Properties

6.3 Understanding Discharge and Mass Flow Rate

6.4 Integral Form of Continuity Equation

Chapter 7: Dynamics of Inviscid Flows – Fundamentals & Application

0/9

7.1 Fundamental Equation of Motion for Inviscid Flow in Cartesian Coordinates

7.2 Pressure Differential between Two Points in an Inviscid Flow Field

7.3 Derivation of Bernoulli’s Equation and Its Assumption

7.4 Physics Behind Bernoulli’s Equation

7.5 Hydraulic Siphon

7.6 Flow Measurement – Venturimeter

7.7 Orifice Meter

7.8 Concept of Static, Stagnation, and Dynamic Pressure

7.10 Vortex Flows

Chapter 8: Dynamics of Viscous Incompressible Flow

0/6

8.1 Introduction to Navier-Stokes Equation

8.2 Plane Poiseuille Flow

8.3 Couette Flow

8.4 Hagen Poiseuille Flow

8.11 Flow Through Branched Pipes

8.12 GATE Problems

Chapter 9: Boundary Layer Theory

0/5

9.1 BOUNDARY LAYER THEORY – I

9.2 BOUNDARY LAYER THEORY – II

9.3 BOUNDARY LAYER THEORY – III

9.4 Problems of BOUNDARY LAYER THEORY

9.5 GATE Questions BOUNDARY LAYER THEORY

Chapter 10: Principle of Similarity and Dimensional Analysis

0/3

10.1 DIMENSIONAL ANALYSIS & PRINCIPLE OF SIMILARITIES – I

10.2DIMENSIONAL ANALYSIS & PRINCIPLE OF SIMILARITIES – II

10.3 GATE Questions DIMENSIONAL ANALYSIS & PRINCIPLE OF SIMILARITIES

Chapter 11: Turbulent Flow

0/1

11.1 Turbulent Flow Introduction

Chapter 12: Fluid Machines

0/14

12.1 Reynolds Transport Theorem Applied to Law of Conservation of Angular Momentum

12.2 Lawn Sprinkler

12.3 Introduction and Classification of Fluid Machines

12.4 Different Components of Velocity

12.5 Fundamental Equation of Energy Transfer in Rotodynamic Machines

12.6 Velocity Diagrams

12.7 Different Components of Energy Transfer

12.26 GATE PROBLEMS

Fluid Machines i

Fluid Machines ii

Fluid Machines iii

Fluid Machines iv

Fluid Machines v

Fluid Machines vi

Chapter 13: Basics of Compressible

0/2

13.1 Basics of Compressible

13.2 Basics of Compressible

E-Book – Fluid Mechanics

0/1

Practice Set – Fluid Mechanics

0/2

Mock Test – Fluid Mechanics

0/2

Module – Heat Transfer

Chapter-1 Introduction of Heat Transfer

0/2

1.1 Introduction of Heat Transfer (Difference between heat transfer & thermodynamics, Modes of Heat Transfer and Variation of Thermal Conductivity)

1.2 Introduction of Heat Transfer (Laws of Heat Transfer)

Chapter-2 Conduction

0/10

2.1 Conduction (Trough a Slab, Electrical Analogy of Heat Transfer, Conductive Thermal Resistance and through composite Slab)

2.2 Conduction (Convection Thermal Resistance, Conduction-Convection Heat Transfer through a composite Slab, Overall Heat Transfer Co-efficient and some examples)

2.3 Conduction (Radial Conduction Heat Transfer through a hollow cylinder & Composite Cylinder and an Example)

2.4 Conduction (Conduction Convection Heat Transfer through a Composite Cylinder and an Example)

2.5 Conduction (Generalized Conduction Equation and Thermal Diffusivity)

2.6 Conduction (Critical Radius of Insulation & Its Physical Significance and Some Examples)

2.7 Conduction (Heat Generation in a slab and an Example)

2.8 Conduction (Radial Conduction Heat Transfer through a Hollow Sphere, Critical Radius of Insulation for Spherical Condition and Variable Thermal Conductivity)

2.9 Conduction (Heat Generation in Cylinder or Wire and an Example based on internal Heat Generation)

2.10 GATE Questions – Conduction

Chapter-3 Extended Surfaces (Fins) and Unsteady State Heat Conduction

0/10

3.1 Basics of Heat Transfer through Extended Surfaces (Fins)

3.2 Analysis of Rectangular Fin having Infinite Length

3.3 Analysis of Rectangular Fin having Finite Length and Insulated at its Tip

3.4 Analysis of Rectangular Fin having Finite Length and Convicted Heat from its Tip

3.5 Heat Transfer through Rod Connected two Heat Source at Different Temperature

3.6 Infinite Long Fin Approximation

3.7 Fins Efficiency and Effectiveness

3.8 Unsteady State (Transient) Heat Conduction

3.9 Examples based on Unsteady State Heat Conduction

3.10 fins-and-unsteady-gate-questions-ht.mp4

Chapter-4 Heat Exchangers

0/10

4.1 Basics Concepts and Classification of Heat Exchanger

4.2 Temperature Profile of Heat Exchanger

4.3 Logarithmic Mean Temperature Difference

4.4 Example Based on Logarithmic Mean Temperature Difference

4.5 Special Cases Regarding Logarithmic Mean Temperature Difference

4.6 Design of Heat Exchanger by Logarithmic Mean Temperature Difference Method

4.7 Effectiveness of Heat exchangers

4.8 Effectiveness of Parallel and Counter Flow Heat exchangers

4.9 Design of Heat Exchanger by Effectiveness-NTU Method

4.10 410-heat-exchangers-gate-questions-ht

Chapter-5 Radiation

0/7

5.1 Fundamentals of Thermal Radiation

5.2 Basic Definition/Terminologies of Thermal Radiation

5.3 Laws of Thermal Radiation (Kirchhoff,Planck,Wiens displacement,Stefan-Boltzmann & Lambert Cosine)

5.4 Shape Factor (Concept of shape factor & Shape factor Relations like Reciprocity,Summation,superposition & Symmetrycity etc)

5.5 Radiation Network & Radiation Exchange

5.6 Radiation Shields & Radiation effect in Temperature Measurement

5.7 GATE Questions Radiation

Chapter-6 Convection

0/7

6.1 Introduction to Convection Heat Transfer

6.2 Basics of Forced Convection Heat Transfer

6.3 Thermal Boundary Layer Concept

6.4 External Forced Convection ( Flow over a flat plate )

6.5 Internal Forced Convection (Flow through Pipe or duct )

6.6 Natural or Free Convection-1

Convection Gate Questions

Chapter-7 Gate Questions

0/5

7.1 Gate Questions

7.2 Gate Questions

7.3 Gate Questions

7.4 Gate Questions

7.5 Gate Questions

E-Book – Heat Transfer

0/1

Practice Set – Heat Transfer

0/2

Mock Test – Heat Transfer

0/2

Module – Strength of Materials

Chapter 1: Load & its Effect

0/7

1.1 Load & is Effect Part 1

1.2 Load & is Effect Part 2

1.3 Load & is Effect Part 3

1.4 Load & is Effect Part 4

1.5 Load & is Effect Part 5

1.6 Load & is Effect GATE Questions

1.7 Load & is Effect GATE Questions

Chapter 2: Basic Concept Of SOM

0/7

2.1 Basic Concept of SOM Part 1

2.2 Basic concept of SOM Part 2

2.3 Basic concept of SOM Part 3

2.4 Basic concept of SOM Part 4

2.5 Basic concept of SOM GATE Questions

2.6 Basic concept of SOM GATE Questions Part-1

2.7 Basic concept of SOM GATE Questions Part-2

Chapter 3: Axial Stress

0/7

3.1 Axial Stress ( Bars in Series )

3.2 Axial Stress ( Elongation of Different Session )

3.3 Axial Stress ( Bars in Parallel )

3.4 Axial Stress ( Thermal Stress )

3.5 Axial Stress And Thermal Stress GATE Questions

3.6 Axial Stress And Thermal Stress GATE Questions Part-1

3.7 Axial Stress And Thermal Stress GATE Questions Part-2

Chapter 4: Bending Stress

0/4

4.1 Bending Equation

4.2 Examples based on Bending Equation

4.3 Beam Of Uniform Strength & Bending of Wire

4.4 Bending Stress GATE Questions

Chapter 5: Direct Shear Stress

0/4

5.1 Direct Shear Stress & Its Distribution

5.2 Examples on Direct Shear Stress

5.3 Shear Center

5.4 Direct Shear Stress GATE Questions

Chapter 6: Pure Torsion

0/4

6.1 Torsion Equation

6.2 Examples on Pure Torsion

6.3 Pure Torsion (Bars in series & parallel)

6.4 Pure Torsion Gate Questions

Chapter 7: Combined Stress and Strain

0/6

7.1 Combined Stress and Strain Part 1

7.2 Combined Stress ans Strain Part 2

7.3 Examples Based on Combined Stress and Strain

7.4 Theory Of Failure

7.5 Mohr’s Circle

7.6 Combined Stress and Strain GATE Questions

Cheater 8: Column & Pressure Vessel

0/3

8.1 Cylindrical is Spherical

8.2 Column & Struts

8.3 Pressure Vessel & Column GATE Questions

Chapter 9: SFD and BMD

0/5

9.1 Beam Load & Support

9.2 Examples on Reaction Calculation

9.3 Shear Force & Bending moment

9.4 Examples on Shear Force & Bending Moment

9.5 SFD & BMD GATE Questions

Chapter 10: Slope & Deflection

0/4

10.1 Slope & Deflection Part 1

10.2 Examples on Slope & Deflection Part 2

10.3 Slope & Deflection Part 3

10.4 Slope & Deflection GATE Questions

Chapter 11: Shear Centre

0/1

11.1 Shear Centre

Chapter 12: GATE Questions

0/6

Gate questions vid -1

Gate questions vid -2

Gate questions vid -3

Gate questions vid -4

Gate questions vid -5

Gate questions vid -6

E-Book – Strength of Materials

0/1

Practice Set – Strength of Materials

0/2

Mock Test – Strength of Materials

0/2

Module – Theory of Machines

Chapter-1 Simple Mechanisms

0/11

1.1 Theory of Machines Introduction

1.2 Kinematic Link or an Element and Kinematic Pairs

1.3 Classification of Kinematic Pairs

1.4 Kinematic Chains

1.5 Degree of Freedom

1.6 Kutzbach Equation and Gruibler’s Criterion

1.7 Simple Mechanisms, its inversions and Grashof’s law

1.8 Inversion of Single Slider Crank Mechanism

1.9 Inversion of Double Slider Crank Mechanism

1.10 Mechanical Advantage and Miscellaneous

1.11 Chapter-1 GATE Questions

Chapter-2 Velocity and Acceleration Analysis

0/6

2.1 Introduction to Instantaneous Center

2.2 Kennedy’s Theorem and Instantaneous Center Approach

2.3 Theorem of Angular Velocity

2.4 Relative Velocity Approach

2.5 Acceleration Analysis

2.6 GATE Questions

Chapter-3 Gears and Gear Trains

0/8

3.1 Introduction and Classification of Gears

3.2 Gear Terminology and Law of Gearing

3.3 Involute Profile of Gear Teeth

3.4 Interference in Gears and Elimination of Interference

3.5 Cycloidal Profile of Gear Teeth

3.6 Gear Trains part-I

3.7 Gear Trains part-II

3.8 GATE Questions

Chapter-4 Analysis of Single Slider Crank Mechanism

0/2

4.1 Kinematic & Dynamics Analysis and Offset Slider Crank Mechanism

4.2 Chapter-4 GATE Questions

Chapter-5 Flywheel

0/4

5.1 Turning Moment Diagram and Principle of working of Flywheel

5.2 Fundamental Equation of Flywheel and Requirement of Flywheel for Multi cylinder Engine

5.3 Types of Flywheel and Flywheel in Punching Press

5.4 Chapter-5 GATE Questions

Chapter-6 Governors

0/5

6.1 Introduction of Governors and Watt’s Governor

6.2 Porter and Proell Governor

6.3 Hartnell Governor and Physical Characteristics of Governors

6.4 Governor Controlling Force and Controlling Force Diagram

6.5 Standard Questions on Governors

Chapter-7 Balancing

0/6

7.1 Introduction and Static Balancing of Rotating Masses

7.2 Dynamic Balancing of Rotating Masses

7.3 Primary Balancing of Reciprocating Masses

7.4 Secondary Balancing of Reciprocating Masses and Role of Firing order in Balancing

7.5 Direct and Reverse Crank Method

7.6 Chapter-7 GATE Questions

Chapter-8 Mechanical Vibrations

0/7

8.1 Introduction of Vibrations and Natural Vibrations

8.2 Energy Method and Torque Method

8.3 Torsional Vibration and Religh’s Method

8.4 Damped Vibration Systems

8.5 Force Damped Vibration and Magnification Factor

8.6 Vibration Isolation, Transmissibility Ratio and Critical Speed of Shaft

8.7 Chapter-8 GATE Questions

Chapter-9 Cams and Followers

0/4

9.1 Introduction of Cams & Followers and their Classification

9.2 Cam Terminologies and Followers Derivatives

9.3 Types of Follower Motion

9.4 Standard Questions on Cams and Followers

Chapter-10 Gyroscope

0/3

10.1 Introduction of Gyroscope

10.2 Gyroscopic Effects for Aircraft and Ships

10.3 Gyroscopic Effect for a Power plant Shaft and Automobile

E-Book – Theory of Machines

0/1

Practice Set – Theory of Machines

0/2

Mock Test – Theory of Machines

0/2

Module – Material Science

Chapter 1: Structure of Material

0/2

1.1 Structure Of Material – Part – I

1.2 Structure Of Material – Part – II

Chapter 2: Properties of Material & Testing

0/3

2.1 Properties Of Material & Testing – Part – I

2.2 Properties Of Material & Testing Part – II

2.3 Properties Of Material & Testing Part – III

Chapter 3: Phase Diagram

0/8

3.1 Phase Diagram & Hume Rothery Rules

3.2 Gibs Phase Rule & Lever Arm Rule

3.3 Types Of Phase Diagram

3.4 Transfomation-I

3.5 Transformation-II

3.6 Transformation-III

3.7 Martensitic & Bainitic Transformation

3.8 Cast Iron & Effects Of Alloying On Steel

Chapter 4: Heat Treatment

0/1

4.1 Introduction to Heat Treatment & Hardening Process

Chapter 5: GATE Questions

0/1

5.1 Gate Questions

E-Book – Material Science

0/1

Practice Set – Material Science

0/2

Mock Test – Material Science

0/1

Module – Verbal Ability

Chapter 1: Noun

0/1

Chapter 2: Pronoun

0/1

Chapter 3: Subject and Verb Agreement

0/1

3.1 Subject And Verb Agreement

Chapter 4: Tenses

0/1

Chapter 5: Modifiers

0/2

5.1 Modifiers_Part_1

5.2 Modifiers_Part_2

Chapter 6: Vocabulary Building

0/3

6.1 Introduction to Vocabulary

6.2 Vocabulary – Root Words

6.3 Facts | Inferences | Judgements

Chapter 7: Verbal Logic

0/4

7.1 Course of Action

7.2 Critical Reasoning

7.3 Statement, Assumption & Conclusion

7.4 Deductive Logic & Logical Consistency

Chapter 8: Reading Comprehension (RC)

0/3

8.1 Introduction to Reading Comprehension

8.2 Reading Comprehension -1 (How to solve RC Questions )

8.3 Reading Comprehension tones

Chapter 9: Articles & Prepositions

0/1

9.1 Articles & Prepositions

E-Book – Verbal Ability

0/1

Practice Set – Verbal Ability

0/2

Mock Test – Verbal Ability

0/1

Module – Logical Reasoning

Chapter 1: Series

0/1

Chapter 2: Coding and Decoding

0/1

2.1 Coding and Decoding

Chapter 3: Analytical Reasoning (AR) or Data Arrangement

0/1

3.1 Data arrangement

Chapter 4: Blood Relations

0/1

4.1 Blood Relations

Chapter 5: Clock and Calendars

0/2

Chapter 6: Data Interpretation

0/1

6.1 Data interpretation

Chapter 7: Directions

0/1

Chapter 8: Syllogism

0/1

E-Book – Logical Reasoning

0/1

Practice Set – Logical Reasoning

0/2

Mock Test – Logical Reasoning

0/1

Module – Refrigeration & AC

Chapter 1: Properties of Pure Substances

0/5

1.1 Concept of Pure substance & Table and Charts like P-V , T-S & P-T Plot

1.2 Properties of Pure Substance and its Calculation , H-S Plot

1.3 Ideal gas equation , behavior of Ideal & Real gases and Reduced temperature & Pressure Concept.

1.4 Examples on Properties of Pure Substance

1.5 Gate Question on Properties of Pure Substance.

Chapter 2: Basics of Refrigeration and Air Refrigeration

0/2

2.1 Basics of Refrigeration

2.2 Air Refrigeration (Reversed Brayton Cycle )

Chapter 3: Refrigerants

0/1

3.1 Refrigerants

Chapter 4: Vapour Compression Refrigeration System (VCRS)

0/3

4.1 Basics of Vapour Compression Refrigeration System

4.2 Various Conditions of Vapour Compression Refrigeration System

4.3 Various effect on Vapour Compression Refrigeration System

Chapter 5: Vapour Absorption Refrigeration System (VARS)

0/2

5.1 Basics of VARS

5.2 Advancement of Theoretical VARS Cycle

Chapter 6: Psychrometry & Its Process

0/3

6.1 Introduction to Air Conditioning

6.2 Psychrometry Part-I

6.3 Psychrometry Part-II

Chapter 7: GATE Questions

0/7

7.1 GATE Questions – I

7.2 GATE Questions – II

7.3 GATE Questions – III

7.4 GATE Questions – IV

7.5 GATE Questions – V

7.6 GATE Questions – VI

7.7 GATE Questions – VII

E-Book – Refrigeration & Air Conditioning

0/1

Practice Set – Refrigeration & Air Conditioning

0/2

Mock Test – Refrigeration & AC

0/2

Module – Application of Thermodynamics

Chapter 1: Properties of Pure Substance

0/3

1.1 Pure substance (THERMO)

1.2 Properties of Pure Substance (THERMO)

1.3 Pure Substance (Example THERMO)

Chapter 2: Gas power Cycles (Brayton Cycle )

0/7

2.1 Basics of Power Cycle & Gas Turbine

2.2 Effect of various Parameters on Gas Turbine

2.3 Isentropic Efficiency & Regeneration

2.4_Gate Questions_On_Brayton_Cycle

2.5_Gas Turbine_Intercoding

2.6_Gas Turbine_Reheating

2.7_Gate Questions_On_Brayton_Cycle

Chapter 3: Vapour power cycles

0/6

3.1 Basics of Vapour Power Cycle (Steam Turbine)

3.2 Ways to Improve The Efficiency of Vapour Power Cycle

3.3 Ideal Reheat Cycle

3.4 Ideal Regenerative Rankine Cycle

3.5 Combined Cycle(Binary Cycle)

3.6 Gate Questions on Rankine Cycle

Chapter 4: Air and Gas Compressor

0/1

4.1 Air and Gas Compressor

Chapter 5: IC Engines: Air-standard Otto, Diesel, and dual cycle

0/5

5.1 I C Engine : Otto Cycle

5.2 I C Engine : Exapmle Based on Otto Cycle

5.3 I C Engine : Diesel Cycle

5.4 I C Engine : Dual Cycle

5.5 I C Engine : Comparison of Efficiency of Different Cycle

Chapter 6: Gate Questions (Application of Thermodynamics)

0/4

6.1 Gate Questions (Application of Thermodynamics)

6.2 Gate Questions (Application of Thermodynamics)

6.3 Gate Questions (Application of Thermodynamics)

6.4 Gate Questions (Application of Thermodynamics)

E-Book – Application of Thermodynamics

0/1

Practice Set – Application of Thermodynamics

0/2

Mock Test – Application of Thermodynamics

0/2

Module – Manufacturing Engineering

Chapter 1: Metal Casting

0/15

1.1 Basics of Metal Casting

1.2 Allowances in Casting

1.3 Types of Pattern and its materials

1.4 Mould Making & Properties of Sand

1.5 Core Making

1.6 Paddings & Chills

1.7 Pouring & Solidifications

1.8 Gating System

1.9 Aspiration Effect

1.10 Solidifications Type, Time and Felting & Inspections

1.11 Riser & Riser Design

1.12 Riser for plate & Disc shaped casting

1.13 Special Casting

1.14 Defects in Casting

1.15 Metal Casting GATE Questions

Chapter 2: Metal Forming

0/11

2.1 Introduction of Metal Forming

2.2 Strain Hardening

2.3 Yield Point Phenomenon & Hot Working

2.4 Flow stress & Flow curve Equations

2.5 Plastic Deformation & Yield Criteria

2.6 Rolling Process

2.7 Wire drawing

2.8 Tube Drawing & Extrusion Process

2.9 Forging Operations

2.10 Defects in Metal Forming

2.11 Metal Forming GATE Questions

Chapter 3: Sheet Metal Operations

0/6

3.1 Sheet Metal Operations

3.2 Deep Drawing

3.3 Bending & Minor Sheet Metal Operations

3.4 Special Metal Forming Processes

3.5 Sheet Metal Operations Gate Questions

3.6 Sheet Metal Operations Gate Questions

Chapter 4: Metal Cutting

0/14

4.1 Introduction to Metal cutting

4.2 Influence of tool geometry on various parameters

4.3 Mechanics of Machining

4.4 Shear Angle, Velocities, Shear Strain & Rate of Shear Strain

4.5 Orthogonal and oblique Cutting

4.6 Force in the Metal Cutting Operation

4.7 Shear Stress, Work Done & Specific Cutting Energy

4.8 Heat Generations in Cutting

4.9 Tool Failure Criteria & Tool Life

4.10 Economics of Machining

4.11 Conversion of Oblique Cutting to Orthogonal Cutting

4.12 Tool Materials

4.13 Grinding Operations

4.14 Metal Cutting GATE Questions

Chapter 5: Non Traditional Machining

0/3

5.1 Non Traditional Machining-I (AJM,USM & ECM )

5.2 Non Traditional Machining-II (EDM,EBM,LBM& USM )

5.3 Non Traditional Machining GATE Questions

Chapter 6: Computer Integrated Manufacturing System

0/4

6.1 Introduction to advanced Machining Methods

6.2 Computer Integrated Manufacturing-I

6.3 Computer Integrated Manufacturing-II

6.4 Computer Integrated Manufacturing GATE Questions

Chapter 7: Welding

0/6

7.1 Gas Welding

7.2 Arc and Thermit Welding

7.3 Resistance Welding

7.4 Soldering, Brazing & Braze Welding

7.5 Setting of Power Sources

7.6 Welding GATE Questions

Chapter 8: Metrology and Inspection

0/10

8.1 Introduction of Metrology and Linear Measurements

8.2 Limits, Fits and Tolerances Part-1

8.3 Limits, Fits and Tolerances Part-2

8.4 Comparators

8.5 Form and Finish Measurement

8.6 Limit Gauges Part-1

8.7 Limit Gauges Part-2

8.8 Angular Measurements

8.9 Machine Tool Metrology (Alignment & Testing Methods)

8.10 Metrology and Inspection GATE Questions

Chapter 9: Machining and Machine Tool Operations

0/3

9.1 Machining and Machine Tool Operations

9.2 Machining and Machine Tool Operations

9.3 Machining and Machine Tool Operations

Chapter 10: Metrology and Inspection

0/1

10.1 Metrology and Inspection

Chapter 11: Computer Integrated Manufacturing

0/1

11.1 Computer Integrated Manufacturing

E-Book – Manufacturing Engineering

0/1

Practice Set – Manufacturing Engineering

0/2

Mock Test – Manufacturing Engineering

0/2

Module – Machine Design

Chapter 1: Fundamentals of Machine Design

0/3

1.1 Brief overview of Design

1.2 Loads and Its Effects-I

1.3 Loads and Its Effects-II

Chapter 2: Design of Machine Elements under Static & Combined Loading

0/3

2.1 Design of Machine Elements under Static Loading-I

2.2 Design of Machine Elements under Static Loading-II

2.3 Design of Machine Elements under Combined Loading

Chapter 3: Theories of Failure

0/4

3.1 Theories of Failure-I

3.2 Theories of Failure-II

3.3 Theories of Failure-III

3.4 Chapter-3 GATE Questions

Chapter 4: Design of Machine Elements under Fatigue Loading

0/4

4.1 Fatigue Consideration in Design

4.2 Stress Concentration Effect

4.3 Design Approach for Fatigue Loading

4.4 Chapter-4 GATE Questions

Chapter 5: Design of Shafts and springs

0/3

5.1 Design of Shafts

5.2 Design of springs

5.3 GATE Questions

Chapter 6: Design of Brakes

0/3

6.1 Design of Block (shoe) Brakes

6.2 Design of Band Brakes

6.3 GATE Questions

Chapter 7: Design Of Bearings

0/4

7.1 Design of Bearings Part – I

7.2 Design of Bearings Part – II

7.3 Design of Bearings Part – III

7.4 Gate Questions

Chapter 8: Design of clutches

0/1

8.1 Design of clutches

Chapter 9: Design of Joints

0/4

9.1 Design of Joints Part-1

9.2 Design of Joints Part-2

9.3 Design of Joints Part-3

9.4 Design of Joints GATE Questions

Chapter 10: Design Of Gears

0/4

10.1_Design Of Gears(MD)

10.2_Design Of Gears(MD)

10.3_Design Of Gears(MD)

10.4_Design Of Gears(MD)

E-Book – Machine Design

0/1

Practice Set – Machine Design

0/2

Mock Test – Machine Design

0/2

Module – Industrial Engineering

Chapter 1: Basic of Industrial Engineering

0/3

1.1 Basic of Industrial Engineering

1.2 Break Even Analysis

1.3 Gate Questions

Chapter 2: Inventory Control

0/5

2.1 Basic Inventory Control

2.2 Deterministic Model Part 1

2.3 Deterministic Model Part 2

2.4 Probability & Inventory Management Technique

2.5 Gate Questions

Chapter 3: Fore Casting

0/2

3.1 Fore Casting

3.2 Gate Questions

Chapter 4:Queuing Theory

0/2

4.1 Queuing Theory

4.2 GATE Question

Chapter 5: Sequencing

0/2

5.2 GATE Questions

Chapter 6: Project Management

0/4

6.1 Basic Introduction Project Management

6.3 Critical Path Method

6.4 Gate Questions

Chapter 7: Linear Programming

0/4

7.1 Graphical Methods

7.2 Simplex Method

7.3 Transportation

7.4 GATE Questions

E-Book – Industrial Engineering

0/1

Practice Set – Industrial Engineering

0/2

Mock Test – Industrial Engineering

0/2

Practice and Doubt Session

Chapter 1: Quantitative Aptitude

0/2

1.1 Quantitative Aptitude

1.2 Quantitative Aptitude

Chapter 2: Engineering Mathematics

0/4

2.1 Engineering Mathematics

2.2 Engineering Mathematics

2.3 Engineering Mathematics

2.4 Engineering Mathematics

Chapter 3: Engineering Mechanics

0/1

3.1 Engineering Mechanics

Chapter 4: Thermodynamics

0/2

4.1 Thermodynamics

4.2 Thermodynamics

Chapter 5: Manufacturing Engineering

0/2

5.1 Manufacturing Engineering

5.2 Manufacturing Engineering

Chapter 6: Fluid Mechanics

0/1

6.1 Fluid Mechanics

Chapter 7: Strength of Materials

0/2

7.1 Strength of Materials

7.2 Strength of Materials

Chapter 8: ATD, RAC, IC Engine, Power Cycle (PS)

0/1

8.1 ATD, RAC, IC Engine, Power Cycle (PS)

Chapter 9: Heat Transfer

0/1

9.1 Heat Transfer

Chapter 10: Machine Design

0/1

10.1 Machine Design

E-Book – Practice and Doubt Session

0/1

Revision for GATE With Most Important Topics

Chapter 1: Concept of Gateflix Revision

0/1

1.1 Concept of Gateflix Revision

Chapter 2: Heat Transfer Revision

0/12

2.1 Basics of Heat Transfer & its Mode

2.2 Conduction Through a Slab

2.3 Conduction Heat Transfer through Composite Cylinder

2.4 Critical Radius of Insulation

2.5 Conduction (Heat Generation in Cylinder or Wire)

2.6 Logarithmic Mean Temperature Difference (Special Cases)

2.7 Design of Heat Exchanger by Effectiveness NTU Method

2.8 Shape Factor or View Factor

2.9 Radiation Network & Radiation Exchange

2.10 Basics of Forced Convection Heat Transfer

2.11 Forced Convection (Flow over Plate)

2.12 Forced Convection (Internal Flow)

Chapter 3: Thermodynamics Revision

0/10

3.1 Non Flow Work Transfer in Various Processes

3.2 First Law of Thermodynamics

3.3 Free Expansion

3.4 Steady Flow Energy & Work Flow

3.5 Second Law of Thermodynamics

3.6 Entropy Change for Ideal Gas

3.7 Exergy & Exergy Change Due to Finite Temperature Difference

3.8 Exergy Associated with K.E. & P.E.

3.9 Joule-Thomson Coefficient & Clapeyron Equation

3.10 Pure Substances

Chapter 4: Engineering Mechanics Revision

0/13

4.1 Concurrent Force System

4.2 Tips to Draw Free Body Diagram

4.3 Analysis of Plane Trusses

4.4 Newton’s Law of Motion

4.6 Circular Motion and Projectile Motion

4.7 Linear Momentum of Particles and Systems

4.8 Work and Energy

4.9 Collision Theory

4.10 Dynamics of Rigid Bodies – II

4.11 Dynamics of Rigid Bodies – III

4.12 Kinetic Energy in Pure Rolling

4.13 Dynamics of Rigid Bodies – IV

Chapter 5: Fluid Mechanics Revision

0/16

5.1 Surface Tension

5.2 Fluid Translation, Rotation & Deformation – I

5.3 Fluid Translation, Rotation & Deformation – II

5.4 Comparison of Turbines

5.5 Concept of Specific Speed

5.6 Degree of Reaction

5.7 Dimensionless Numbers

5.8 Forces on Plane Surfaces Immersed in Fluid at Rest

5.10 Stability Condition of Fully Submerged Bodies

5.11 Stability Condition of Partially Submerged Bodies

5.12 U Tube Manometer (Negative)

5.13 U Tube Manometer (Positive)

5.14 Understanding Discharge & Mass Flow Rate

5.15 Velocity Diagram for Centrifugal Pump Impeller

5.16 Velocity Diagrams

Chapter 6: Refrigeration & Air Conditioning

0/2

6.2 Basics of Psychrometry

Chapter 7: Applied Thermodynamics Revision

0/4

7.1 Gas Turbine (Brayton Cycle)

7.2 Steam Turbine (Rankine Cycle)

7.3 Air Compressor

7.4 I.C. Engine – Otto Cycle & Diesel Cycle

Chapter 8: Machine Design

0/6

8.1 Theories of Failure – I

8.2 Theories of Failure – II

8.3 Fatigue Consideration in Design

8.4 Design Approach for Fatigue Loading

8.5 Design of Springs

8.6 Design of Riveted Joints – II

Chapter 9: Industrial Engineering Revision

0/8

9.1 Break-Even Analysis

9.2 Forecasting

9.3 Queuing Theory

9.4 PERT (Program Evaluation Review Technique)

9.5 Critical Path Method (CPM)

9.6 Graphical Methods

9.7 Special Cases in Graphical Methods

9.8 Transportation

Chapter 10: Strength of Materials Revision

0/8

10.1 Stress and Strain Diagram of Mild Steel

10.2 Axial Stress in Bars

10.3 Bars in Parallel

10.4 Bending Equation

10.5 Pure Torsion Equation

10.6 Mohr Circle

10.7 Pressure Vessels

10.8 Column & Struts

Chapter 11: Theory of Machines Revision

0/12

11.1 Kutzbach Equation and Gruebler’s Criterion

11.2 Simple Mechanism, its Inversions, and Grashof’s Law

11.3 Single Slider Crank Mechanism and its Inversions

11.4 Kennedy’s Theorem and Instantaneous Centre Approach

11.5 Relative Velocity Approach

11.6 Gear Trains – Part II

11.7 Introduction and Static Balancing of Rotating Masses

11.8 Introduction to Vibrations and Natural Vibrations

11.9 Energy Method and Torque Method

11.10 Torsional Vibration and Rayleigh’s Method

11.11 Damped Vibration Systems

11.12 Gyroscopic Effects for Aircraft and Ships

Chapter 12: Manufacturing Revision

0/9

12.1 Basics of Metal Casting

12.2 Allowances

12.3 Pouring & Solidification

12.4 Solidification Types, Time, and Inspections

12.5 Riser & Riser Design

12.6 Rolling Process

12.7 Wire Drawing

12.8 Tube Drawing & Extrusion Process

12.9 Forging Operations

E-Book – Revision for GATE With Most Important Topics

0/1

Practice Set – Revision for GATE With Most Important Topics

0/2

GATE Mechanical Engineering (Newly Added Topics)

Chapter 1: Engineering Mechanics

0/6

1.1 Belt Pulley

1.3 Application of Wedges-Power Screw

1.4 Rolling Friction

1.5 Langrange’s Equation Part -1

1.6 Langrange’s Equation Part -2

Chapter 2: Mechanics of Material (SOM)

0/1

2.1 MECHANICS OF MATERIAL (SOM)

Chapter 3: Fluid Mechanics

0/2

3.1 Fluid Mechanics

3.2 Fluid Mechanics

Chapter 4: Thermodynamics

0/1

4.1 Thermodynamics

Chapter 5: Machining and Machine Tool Operations

0/3

5.1 NC and CNC Machine

5.2 NC Machine and CNC Programming

5.3 CNC Programming

Chapter 6: Metrology and Inspection

0/1

6.1 Metrology and Inspection

Chapter 7: Computer Integrated Manufacturing

0/1

7.1 Computer Integrated Manufacturing

Chapter 8: Aptitude

0/1

Chapter 9: Engineering Mathematics

0/6

9.1 Engineering Mathematics

9.2 Engineering Mathematics

9.3 Engineering Mathematics

9.4 Engineering Mathematics

9.5 Engineering Mathematics

9.6 Engineering Mathematics

Chapter 10: Industrial Engineering (Latest)

0/14

10.1 Industrial Engineering (Latest)

10.2 Industrial Engineering (Latest)

10.3 Industrial Engineering (Latest)

10.4 Industrial Engineering (Latest)

10.5 Industrial Engineering (Latest)

10.6 Industrial Engineering (Latest)

10.7 Industrial Engineering (Latest)

10.8 Industrial Engineering (Latest)

10.9 Industrial Engineering (Latest)

10.10 Industrial Engineering (Latest)

10.11 Industrial Engineering (Latest)

10.12 Industrial Engineering (Latest)

10.13 Industrial Engineering (Latest)

10.14 Industrial Engineering (Latest)

E-Book – GATE -(New Topics)

0/1

Practice Set – GATE -(New Topics)

0/2

Quiz

0/1

Mechanical Engineering Quiz

GATE Mechanical Engineering

% buffered00:00

00:00

Join the conversation

0% Complete

modal-check

This will close in 0 seconds

modal-check

Instructor Registration

Register Now

This will close in 0 seconds

Sign inSign up

Sign in

Don’t have an account? Sign up

Remember meLost your password?

Sign up

Already have an account? Sign in

Please subscribe the course for FULL Access.

X

General Instructions

1. There is only one correct answer to each question

2. A countdown timer at the top right corner of your screen will display the time remaining for you to complete the exam. When the clock runs out, the exam ends by default—you are not required to end or submit your exam.

3. The question palette at the right of the screen shows one of the following statuses of each of the questions numbered:

You have not answered the question
You have not visited the question yet
You have answered the question
You have NOT answered the question but have marked the question for review
You have answered the question but marked it for review.

Paper Specific Instruction

Declaration by the Candidate: I have read and understood all the instructions. All the computer hardware allotted to me is in proper working condition. I declare that I am not carrying any prohibited gadgets like mobile phones, Bluetooth devices, wristwatches, etc., and any prohibited material with me into the examination hall. I agree that if found to be non-compliant with the above declaration, I shall be liable to be debarred from this examination and/or to disciplinary action, which may include a ban from future examinations/tests.